Bearings Special Purpose Categories


Category Matches

Bearings Special Purpose

TopHide Pictures

Bearings - Chamfered Edges
Bearings - Chamfered Edges

Search Rating: 100%

Chamfered edge bearings for Linear Guide Systems and pushbikes

Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Chamfered Edges.

Bearings - Spherical OD
Bearings - Spherical OD

Search Rating: 100%

Bearings with a spherical outside diameter.

Combined listing of spherical OD track rollers and bearings for Linear Guide systems.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Spherical OD.

Bearings - Ball - Textile Industry
Bearings - Ball - Textile Industry

Search Rating: 100%

Special Design Stainless and Chrome Steel Bearings for the Textile Industry.

Bearings in this category often have special features. Not all Bearings are readily available. Please enquire. Designed for use in textile industry machinery.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - Textile Industry.

Bearings - Ball - 304 Stainless Steel
Bearings - Ball - 304 Stainless Steel

Search Rating: 99%

Also see combined categories:
All 300 Grade Stainless Bearings

Corrosion and Heat resistance - Non Magnetic - Unhardened.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm, Width +0/- 0.12 mm. Low load, low speed applications requiring maximum corrosion resistance. Non Magnetic. Cages, balls, races and shields from AISI 304 Stainless Steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 304 Stainless Steel.

Bearings - Ball - 4 Point Contact
Bearings - Ball - 4 Point Contact

Search Rating: 99%

4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 4 Point Contact.

Bearings - Gothic Groove Profile OD
Bearings - Gothic Groove Profile OD

Search Rating: 99%

Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Gothic Groove Profile OD.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Special Purpose
Bearings - Acetal - Special Purpose

Search Rating: 84%

Also see combined categories:
All Plastic Single Row Bearings

Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Special Purpose.

Bearings - Acetal - Special Types
Bearings - Acetal - Special Types

Search Rating: 57%

Also see combined categories:
All Plastic Ball Bearings

Light duty acetal bearings used for drawer runners, light duty tracks, garage doors and more.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Special Types.

Bearings - Acetal - MRI Table
Bearings - Acetal - MRI Table

Search Rating: 56%

Also see combined categories:
All Plastic Single Row Bearings

Special acetal bearings for MRI table wheels


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - MRI Table.

Bearings - Acetal - Disk Cleaning Applications
Bearings - Acetal - Disk Cleaning Applications

Search Rating: 56%

Also see combined categories:
All Plastic Single Row Bearings

Special acetal bearings for disk cleaning


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Acetal - Disk Cleaning Applications.

Bearings Grooved Profile

TopHide Pictures

Bearings - U Groove Profile OD
Bearings - U Groove Profile OD

Search Rating: 56%

Also see combined categories:
All U Groove Bearings and Pulleys

Special OD Bearings.

Contact us for tolerances.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - U Groove Profile OD.

Bearings - Square Groove Profile OD
Bearings - Square Groove Profile OD

Search Rating: 55%

Special bearings. Not readily available.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Square Groove Profile OD.

Bearings - Vee Groove Profile OD
Bearings - Vee Groove Profile OD

Search Rating: 55%

Special OD Bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Vee Groove Profile OD.

Fishing Reel Parts

TopHide Pictures

Coastal In Shore Special 153H Daiwa Parts
Coastal In Shore Special 153H Daiwa Parts

Search Rating: 54%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Coastal In Shore Special 153H Daiwa Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Coastal In Shore Special 153H Daiwa Parts.

Bearings Spherical Roller

TopHide Pictures

Bearings - Roller - Spherical - Tapered Bore - 24000K Series
Bearings - Roller - Spherical - Tapered Bore - 24000K Series

Search Rating: 53%

Also see combined categories:
All Spherical Roller Bearings

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.


Bearings - Roller - Spherical - Tapered Bore - 24100K Series
Bearings - Roller - Spherical - Tapered Bore - 24100K Series

Search Rating: 53%

Also see combined categories:
All Spherical Roller Bearings

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.


Bearings 316 Stainless

TopHide Pictures

Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Search Rating: 52%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed.

Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Search Rating: 52%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded.

Shafting General Purpose

TopHide Pictures

Shafting - Carbon Steel - Keyed
Shafting - Carbon Steel - Keyed

Search Rating: 51%

Also see combined categories:
All Shafting
All Steel Shafting

Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Carbon Steel - Keyed.

Bearings Spherical Roller

TopHide Pictures

Bearings - Roller - Spherical - Tapered Bore - 23024K to 230-500K Series
Bearings - Roller - Spherical - Tapered Bore - 23024K to 230-500K Series

Search Rating: 51%

Also see combined categories:
All Spherical Roller Bearings

Use with H3000 Series Adaptor Sleeves

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:

Bearings - Roller - Spherical - Tapered Bore - 23100K to 231-500K Series
Bearings - Roller - Spherical - Tapered Bore - 23100K to 231-500K Series

Search Rating: 51%

Also see combined categories:
All Spherical Roller Bearings

Use with H3100 Series Adaptor Sleeves

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:

Bearings - Roller - Spherical - Tapered Bore - 22308K to 22356K Series
Bearings - Roller - Spherical - Tapered Bore - 22308K to 22356K Series

Search Rating: 50%

Also see combined categories:
All Spherical Roller Bearings

Use with H2300 Series Adaptor Sleeves or AH2300 Withdrawal Sleeves

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:

Bearings - Roller - Spherical - Tapered Bore - 21305K to 21322K Series
Bearings - Roller - Spherical - Tapered Bore - 21305K to 21322K Series

Search Rating: 50%

Also see combined categories:
All Spherical Roller Bearings

Use with H300 Series Adaptor Sleeves or AH300 Series Withdrawal Sleeves.

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:

Bearings - Roller - Spherical - Tapered Bore - 22224K to 22264K
Bearings - Roller - Spherical - Tapered Bore - 22224K to 22264K

Search Rating: 48%

Also see combined categories:
All Spherical Roller Bearings

Use with H3100 Series Adaptor Sleeves. AH3100 Withdrawal sleeves up to 22234K and AH2200 withdrawal sleeves from 22236K to 22264K

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:

Bearings - Roller - Spherical - Tapered Bore - 23218K to 23256K Series
Bearings - Roller - Spherical - Tapered Bore - 23218K to 23256K Series

Search Rating: 48%

Also see combined categories:
All Spherical Roller Bearings

Use with H2300 Series Adaptor Sleeves. AH3200 Withdrawal sleeves up to 23240K and AH2300 withdrawal sleeves from 23244K to 23256K

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:

Shafting Aluminium

TopHide Pictures

Shafting - Pipe - Aluminium
Shafting - Pipe - Aluminium

Search Rating: 42%

Also see combined categories:
All Pipe Shaft
All Metal Tube

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Pipe - Aluminium.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Bearing Shop Online offers 25256 products in 535 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.