Belts Timing Xl Pitch 5.08mm Categories
Category Matches
Belts Timing XL Pitch 5.08mm
TopHide PicturesBelts - Timing - 5.080mm Pitch - XL - 7.9mm Wide
Search Rating: 100%
Also see combined categories:
All XL 5.08mm Pitch Timing Belts
Standard Series Timing Belts 5.080mm or 0.200 inch pitch.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide.
Power Tool Parts
TopHide PicturesKA85 Belt Sander Black and Decker Parts
Search Rating: 13%
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of KA85 Belt Sander Black and Decker Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of KA85 Belt Sander Black and Decker Parts.
Other Store Pages
Click Page Banner Below
TopMain Pages
Click Page Banner Below
TopTop