Shaft Extender


Category Matches

Square Shaft

TopHide Pictures

Shafting - Linear - Square
Shafting - Linear - Square

Search Rating: 100%


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Linear - Square.

Shafting Aluminium

TopHide Pictures

Shafting - Aluminium
Shafting - Aluminium

Search Rating: 100%

Also see combined categories:
All Shafting
All Aluminium Shafting

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Aluminium.

Shafting - Aluminium - Ceramic Coated
Shafting - Aluminium - Ceramic Coated

Search Rating: 100%

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Aluminium - Ceramic Coated.

Shafting - Aluminium - Ceramic Coated - Tapped
Shafting - Aluminium - Ceramic Coated - Tapped

Search Rating: 100%

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Aluminium - Ceramic Coated - Tapped.

Shafting - Pipe - Aluminium
Shafting - Pipe - Aluminium

Search Rating: 100%

Also see combined categories:
All Pipe Shaft
All Metal Tube

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Pipe - Aluminium.

Shafting - Supported - Pre-Drilled - Aluminium
Shafting - Supported - Pre-Drilled - Aluminium

Search Rating: 100%

Also see combined categories:
All Shafting
All Aluminium Shafting

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Supported - Pre-Drilled - Aluminium.

Shafting General Purpose

TopHide Pictures

Shafting - Carbon Steel - Keyed
Shafting - Carbon Steel - Keyed

Search Rating: 100%

Also see combined categories:
All Shafting
All Steel Shafting

Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Carbon Steel - Keyed.

Shafting Precision Ground

TopHide Pictures

Shafting - Ground - Precision - Chrome Plated
Shafting - Ground - Precision - Chrome Plated

Search Rating: 100%

Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Hardened and recommended for use with precision bearings. Ends are not plated.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Chrome Plated.

Shafting - Ground - Precision - High Carbon Steel
Shafting - Ground - Precision - High Carbon Steel

Search Rating: 100%

Also see combined categories:
All Shafting
All Steel Shafting

Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - High Carbon Steel.

Shafting - Ground - Precision - Stainless 303 Grade
Shafting - Ground - Precision - Stainless 303 Grade

Search Rating: 100%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Stainless 303 Grade.

Shafting - Ground - Precision - Stainless 416 Grade Hardened
Shafting - Ground - Precision - Stainless 416 Grade Hardened

Search Rating: 100%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Stainless 416 Grade Hardened.

Shafting - Ground - Precision - Stainless 420 Grade Hardened
Shafting - Ground - Precision - Stainless 420 Grade Hardened

Search Rating: 100%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Stainless 420 Grade Hardened.

Shafting - Ground - Precision - Stainless 440C Grade Hardened
Shafting - Ground - Precision - Stainless 440C Grade Hardened

Search Rating: 100%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Stainless 440C Grade Hardened.

Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1
Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1

Search Rating: 100%

Also see combined categories:
All Shafting
All Titanium Shafting

CP2 Commercially Pure Titanium Grade 2. Tensile Strength 35.2 kgf/mm2. Yield Strength 28.2 kgf/mm2. Elongation 20 Percent.

Commercially pure for general industrial corrosion applications. UNS R50400. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.3, O 0.25, Ti Balance.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1.

Shafting - Ground - Precision - Titanium - Ti-Gr5 - TC4
Shafting - Ground - Precision - Titanium - Ti-Gr5 - TC4

Search Rating: 100%

Also see combined categories:
All Shafting
All Titanium Shafting

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Titanium - Ti-Gr5 - TC4.

Shafting - Pre Drilled and Tapped - High Carbon Steel
Shafting - Pre Drilled and Tapped - High Carbon Steel

Search Rating: 100%

Also see combined categories:
All Shafting
All Steel Shafting

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Pre Drilled and Tapped - High Carbon Steel.

Shafting - Pre Drilled and Tapped - Stainless Steel Steel
Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Search Rating: 100%

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Pre Drilled and Tapped - Stainless Steel Steel.

Shafts - Pinion
Shafts - Pinion

Search Rating: 100%


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Pinion.

Shafting General Purpose

TopHide Pictures

Shafts - Flexible - Panel Mount - Cased
Shafts - Flexible - Panel Mount - Cased

Search Rating: 100%

Also see combined categories:
All Flexible Panel Mount Shaft

See PDF file at bottom of internet page for Performance Data.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Flexible - Panel Mount - Cased.

Shafts - Flexible - Panel Mount - Open
Shafts - Flexible - Panel Mount - Open

Search Rating: 100%

Also see combined categories:
All Flexible Panel Mount Shaft

See PDF file at bottom of internet page for Performance Data.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Flexible - Panel Mount - Open.

Shafting Precision Ground

TopHide Pictures

Rail Supports - Without Shaft
Rail Supports - Without Shaft

Search Rating: 98%

Also see combined categories:
All Shaft Supports

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Supports - Without Shaft.

Rail Supports - With Shaft
Rail Supports - With Shaft

Search Rating: 98%

Also see combined categories:
All Shaft Supports

Includes linear shafting.

Includes shaft to h6 tolerances. Support is made from aluminium.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Supports - With Shaft.

Rail Supports - With Shaft - One Piece
Rail Supports - With Shaft - One Piece

Search Rating: 98%

Also see combined categories:
All Shaft Supports

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Supports - With Shaft - One Piece.

Assortments

TopHide Pictures

Assortment Kits - Various
Assortment Kits - Various

Search Rating: 95%

Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Assortment Kits - Various. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Assortment Kits - Various.

Collars

TopHide Pictures

Collars - Shaft - Clamp Type - One Piece - Aluminium
Collars - Shaft - Clamp Type - One Piece - Aluminium

Search Rating: 95%

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - One Piece - Aluminium.

Collars - Shaft - Clamp Type - One Piece - Stainless Steel
Collars - Shaft - Clamp Type - One Piece - Stainless Steel

Search Rating: 95%

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - One Piece - Stainless Steel.

Collars - Shaft - Clamp Type - One Piece - Steel
Collars - Shaft - Clamp Type - One Piece - Steel

Search Rating: 95%

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - One Piece - Steel.

Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel
Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel

Search Rating: 95%

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars

Includes 303 and 304 Grade Stainless

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel.

Collars - Shaft - Gripfast - 304 Stainless Steel
Collars - Shaft - Gripfast - 304 Stainless Steel

Search Rating: 95%

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

304 Stainless Body, Retention Ring, Balls and Springs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Gripfast - 304 Stainless Steel.

Collars - Shaft - Gripfast - ABS Plastic
Collars - Shaft - Gripfast - ABS Plastic

Search Rating: 95%

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Gripfast - ABS Plastic.

Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel
Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel

Search Rating: 95%

Also see combined categories:
All Hex Bore Shaft Collars


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel.

Collars - Shaft - Hex Bore - One Piece - Steel
Collars - Shaft - Hex Bore - One Piece - Steel

Search Rating: 95%

Also see combined categories:
All Hex Bore Shaft Collars


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hex Bore - One Piece - Steel.

Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel
Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel

Search Rating: 95%

Also see combined categories:
All Hex Bore Shaft Collars


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel.

Collars - Shaft - Hex Bore - Two Piece - Steel
Collars - Shaft - Hex Bore - Two Piece - Steel

Search Rating: 95%

Also see combined categories:
All Hex Bore Shaft Collars


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hex Bore - Two Piece - Steel.

Collars - Shaft - Hinged - Stainless Steel
Collars - Shaft - Hinged - Stainless Steel

Search Rating: 95%

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hinged - Stainless Steel.

Collars - Shaft - Hinged - Steel
Collars - Shaft - Hinged - Steel

Search Rating: 95%

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hinged - Steel.

Collars - Shaft - Standard - Stainless Steel
Collars - Shaft - Standard - Stainless Steel

Search Rating: 95%

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Standard - Stainless Steel.

Collars - Shaft - Standard - Steel
Collars - Shaft - Standard - Steel

Search Rating: 95%

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. Carbon steel.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Standard - Steel.

Collars - Shaft - With Integral Shim
Collars - Shaft - With Integral Shim

Search Rating: 95%

Also see combined categories:
All Round Bore Shaft Collars

Bore tolerance (+0.003/+0.013). Imperial Collars have undersized tolerances. Metric Collars have oversized tolerances.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - With Integral Shim.

Rollers

TopHide Pictures

Rollers - Durasoft - Shaft Mount - Black Neoprene
Rollers - Durasoft - Shaft Mount - Black Neoprene

Search Rating: 94%

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rollers - Durasoft - Shaft Mount - Black Neoprene.

Rollers - Durasoft - Shaft Mount - Coloured Urethane
Rollers - Durasoft - Shaft Mount - Coloured Urethane

Search Rating: 94%

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rollers - Durasoft - Shaft Mount - Coloured Urethane.

Rollers - Solid - Shaft Mount - Black Neoprene
Rollers - Solid - Shaft Mount - Black Neoprene

Search Rating: 94%

Also see combined categories:
All Solid Shaft Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rollers - Solid - Shaft Mount - Black Neoprene.

Rollers - Solid - Shaft Mount - Coloured Urethane
Rollers - Solid - Shaft Mount - Coloured Urethane

Search Rating: 94%

Also see combined categories:
All Solid Shaft Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rollers - Solid - Shaft Mount - Coloured Urethane.

Linear Bearings

TopHide Pictures

Bearings - Linear - Ball - Closed
Bearings - Linear - Ball - Closed

Search Rating: 90%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

Bearings Press In

TopHide Pictures

Bearings - Press-Fit - Acetal - SDP
Bearings - Press-Fit - Acetal - SDP

Search Rating: 88%

Also see combined categories:
All Press In Bearings

Press fit installation. Do not press bearing against insert. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Carbon steel outer. Self aligning to +/- 5o. Use any shaft material with 0.4 um or finer finish.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Press-Fit - Acetal - SDP.

Stroke Rotary Bushings

TopHide Pictures

Bushings - Stroke Rotary - Miniature
Bushings - Stroke Rotary - Miniature

Search Rating: 88%

Also see combined categories:
All Stroke Rotary Bushings

2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.

Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100oC (Constant), +120oC (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushings - Stroke Rotary - Miniature.

Linear Bearings

TopHide Pictures

Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 88%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Ball - Stainless Steel - Closed.

Bearings - Linear - Frelon Gold Lined - Closed - Precision
Bearings - Linear - Frelon Gold Lined - Closed - Precision

Search Rating: 88%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Frelon Gold Lined - Closed - Precision.

Bearings - Linear - Frelon Gold Lined - Closed - Standard
Bearings - Linear - Frelon Gold Lined - Closed - Standard

Search Rating: 88%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Frelon Gold Lined - Closed - Standard.

Bearings - Linear - Frelon Gold Lined - Open - Precision
Bearings - Linear - Frelon Gold Lined - Open - Precision

Search Rating: 88%

Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Frelon Gold Lined - Open - Precision.

Bearings - Linear - Frelon Gold Lined - Open - Standard
Bearings - Linear - Frelon Gold Lined - Open - Standard

Search Rating: 88%

Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Frelon Gold Lined - Open - Standard.

Linear Bearings with Housing

TopHide Pictures

Housings - Linear - Square
Housings - Linear - Square

Search Rating: 87%

Also see combined categories:
All Linear Bearing Housings

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Linear - Square.

Linear Bearings

TopHide Pictures

Bearings - Linear - Ball - Thomson Precision Steel - Closed
Bearings - Linear - Ball - Thomson Precision Steel - Closed

Search Rating: 87%

Also see combined categories:
All Thomson Linear Ball Bearings

For running on shafts fixed at the ends.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Ball - Thomson Precision Steel - Closed.

Shaftloc

TopHide Pictures

Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Search Rating: 86%

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shaftloc-tm Sleeves - Single Ended.

Linear Bearings

TopHide Pictures

Bearings - Linear - Frelon J Lined - Closed - Precision
Bearings - Linear - Frelon J Lined - Closed - Precision

Search Rating: 86%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Frelon J Lined - Closed - Precision.

Bearings - Linear - Frelon J Lined - Closed - Standard
Bearings - Linear - Frelon J Lined - Closed - Standard

Search Rating: 86%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Frelon J Lined - Closed - Standard.

Drylin Bearings and Systems

TopHide Pictures

Drylin Sliding Bearings
Drylin Sliding Bearings

Search Rating: 86%

Linear sliding motion. Use with Drylin Aluminium Shafts.

Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: Less than 2 N/mm2. Maximum Speed: 8 m/s (dry) Greater than 10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60oC to +100oC (increased wear when used in excess of 80oC).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Drylin Sliding Bearings.

Linear Bearings

TopHide Pictures

Bearings - Linear - Ball - Miniature - Super High Precision
Bearings - Linear - Ball - Miniature - Super High Precision

Search Rating: 84%

Also see combined categories:
All Closed Linear Ball Bearings

High Precision Corrosion Resistant Miniature Linear Bearings.

High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Ball - Miniature - Super High Precision.

Bearings One Way Clutch

TopHide Pictures

Bearings - One Way - Roller
Bearings - One Way - Roller

Search Rating: 84%

Also see combined categories:
All One Way Clutch Bearings

Roller Clutch Bearings rotate in one direction only.

Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - One Way - Roller.

Housings with Bearing

TopHide Pictures

Housings - Igubal - Sliding
Housings - Igubal - Sliding

Search Rating: 82%

Also see combined categories:
All Housings with Integral Bearing

Housing: Aluminium. Insert: Sliding film Iglidur(R) J. Tolerance for the Shaft: h7. Use with Drylin aluminium shafts.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Igubal - Sliding.

Clips

TopHide Pictures

Push On Retaining Rings - Carbon Steel
Push On Retaining Rings - Carbon Steel

Search Rating: 79%

Also see combined categories:
All Push On Rings

M1465 / DTX / Seeger ZA and KS.

Thrust load shown is calculated for ideal conditions with mild steel shaft. If no thrust load is shown, testing is suggested.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Push On Retaining Rings - Carbon Steel.

Bearings Mounted

TopHide Pictures

Bearings - SDP - PTFE Filled Acetal - Flange Mounted
Bearings - SDP - PTFE Filled Acetal - Flange Mounted

Search Rating: 77%

Also see combined categories:
All Press In Bearings

Retainer : Carbon Steel Black Oxide Finish. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Self lubricating. Use any shaft material with 0.4 um or finer finish. Soft or hard shafting is OK.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - SDP - PTFE Filled Acetal - Flange Mounted.

Circlips

TopHide Pictures

Circlips - External - Grooveless
Circlips - External - Grooveless

Search Rating: 76%

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Circlips - External - Grooveless.

Clips

TopHide Pictures

Snap Rings - External - Basic
Snap Rings - External - Basic

Search Rating: 76%

Also see combined categories:
All External Snaprings

Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.

Carbon sping steel. Used on the outside diameter of a bearing, shaft or similar equipment.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Snap Rings - External - Basic.

Bearings Mounted

TopHide Pictures

Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning
Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning

Search Rating: 74%

Also see combined categories:
All Press In Bearings

Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Stee black oxide finish. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer. Non aligning.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning.

Linear Bearings

TopHide Pictures

Bearings - Linear - Sliding - Ceramic Coated
Bearings - Linear - Sliding - Ceramic Coated

Search Rating: 71%

Also see combined categories:
All Sliding Linear Bearings

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Sliding - Ceramic Coated.

Bearings Press In

TopHide Pictures

Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP
Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP

Search Rating: 69%

Also see combined categories:
All Press In Bearings

Porous sintered bronze bearing. -28 to 95 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP.

Bearings Hydrodynamic

TopHide Pictures

Bearings - Hydrodynamic Pressure
Bearings - Hydrodynamic Pressure

Search Rating: 69%

Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Hydrodynamic Pressure.

Linear Bearings with Housing

TopHide Pictures

Housings - Linear - Pillow Block - Closed - Ceramic Coated
Housings - Linear - Pillow Block - Closed - Ceramic Coated

Search Rating: 69%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Linear - Pillow Block - Closed - Ceramic Coated.

Linear Bearings

TopHide Pictures

Bearings - Linear - Sliding - Stainless - PTFE - Closed
Bearings - Linear - Sliding - Stainless - PTFE - Closed

Search Rating: 68%

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Sliding - Stainless - PTFE - Closed.

Bearings - Linear - Sliding - Stainless - PTFE - Open
Bearings - Linear - Sliding - Stainless - PTFE - Open

Search Rating: 68%

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Linear - Sliding - Stainless - PTFE - Open.

Bushes Bronze

TopHide Pictures

Bushes - Bronze - Sintered - Unflanged - Oilite
Bushes - Bronze - Sintered - Unflanged - Oilite

Search Rating: 66%

Also see combined categories:
All Bronze Bushes
All Unflanged Bronze Bushes

Genuine Oilite oil impregnated sintered bronze bushes.

Genuine Oilite Sintered Bronze designed to be fitted in H7 housings and f7 shafts. Static Load: 50N per mm Sq. Dynamic Load: 15N per mm sq. Rec Speed Range: 0.3 mtr per second to 0.5 mtr per second. Limit one Pv factor no greater than 1.8 Pv (Pv= N per mm sq x mtr per second).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Bronze - Sintered - Unflanged - Oilite.

Bushes - Bronze - Sintered - Flanged - Oilite
Bushes - Bronze - Sintered - Flanged - Oilite

Search Rating: 65%

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Genuine Oilite flanged oil impregnated sintered bronze bushes.

Genuine Oilite Sintered Bronze designed to be fitted in H7 housings and f7 shafts. Static Load: 50N per mm Sq. Dynamic Load: 15N per mm sq. Rec Speed Range: 0.3 mtr per second to 0.5 mtr per second. Limit one Pv factor no greater than 1.8 Pv (Pv= N per mm sq x mtr per second).

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushes - Bronze - Sintered - Flanged - Oilite. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Bushes - Bronze - Sintered - Flanged - Oilite.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Flat - Chrome Steel
Bearings - Thrust - Ball - Flat - Chrome Steel

Search Rating: 61%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Flat - Chrome Steel.

Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Search Rating: 61%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Flat - Stainless Steel.

Bearings - Thrust - Ball - Grooved - Chrome Steel
Bearings - Thrust - Ball - Grooved - Chrome Steel

Search Rating: 60%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - Chrome Steel.

Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic
Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic

Search Rating: 60%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic.

Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Search Rating: 60%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - Stainless Steel.

Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic
Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic

Search Rating: 60%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic.

Bearings One Way Clutch

TopHide Pictures

Bearings - One Way - Sprag - Standard
Bearings - One Way - Sprag - Standard

Search Rating: 48%

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - One Way - Sprag - Standard.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Bearing Shop Online offers 25256 products in 536 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.