Balls Metallic Categories
Balls - Chrome Steel
Hardness: Rockwell C: 60-70.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. SAE 52100 Chrome Steel. Hardness: Rockwell C: 60-70. Specific Gravity: 7.833.
Related Information:
There is also a good range of Balls - Chrome Steel on the Small Parts and Bearings website.
Balls - Phosphor Bronze
Specific Gravity 8.4
Grades shown are AFBMA / ISO3290-1.
Related Information:
There is also a good range of Balls - Phosphor Bronze on the Small Parts and Bearings website.
Balls - Steel - Bored
Bored steel balls as used in steel rod ends.
Hardness: 58-64 Rc. Material: SUJ-2.
Related Information:
There is also a good range of Balls - Steel - Bored on the Small Parts and Bearings website.
Balls - Tungsten Carbide
Extreme hardness and wear resistance.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Precision Grade: Grade 25. Hardness: Rockwell A: 91.5 (Approx 77 Rockwell C). Extreme hardness and wear resistance. Specific Gravity: 14.95.
Related Information:
There is also a good range of Balls - Tungsten Carbide on the Small Parts and Bearings website.
Balls - Stainless Steel - 304 Grade
A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Non annealed. Hardness: Rockwell C: 25-39. Specific Gravity: 7.916. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs. Note! Increase in magnetic permeability may occur due to the grinding process and can be relieved by heating to over 1000 oC.
Related Information:
There is also a good range of Balls - Stainless Steel - 304 Grade on the Small Parts and Bearings website.
Balls - Stainless Steel - 316 Grade
A4 Grade. Very low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities. Note! Increase in magnetic permeability may occur due to the grinding process and can be releived by heating to over 1000 oC.
Related Information:
There is also a good range of Balls - Stainless Steel - 316 Grade on the Small Parts and Bearings website.
Balls - Stainless Steel - 316L Grade
Easier to machine than standard 316 grade.
316L Stainless Steel has the same properties as 316, except that it has a lower carbon content. It is also easier to machine. Non-magnetic. Resistant to severe corrosive conditions. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972.
Related Information:
There is also a good range of Balls - Stainless Steel - 316L Grade on the Small Parts and Bearings website.
Balls - Stainless Steel - 400 Grade
Hardness: Rockwell C: 55-60. Includes 420 and 440C grades
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. AISI440C Stainless Steel.
Related Information:
There is also a good range of Balls - Stainless Steel - 400 Grade on the Small Parts and Bearings website.
Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI
Implant Grade can be used for Jewellery and Body Piercing. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent.
Precision Grade: 200. Grades shown are AFBMA / ISO3290-1. Plain. Composition Percentage: Al 5.5-6.5, V 3.5-4.5, N 0.03, C 0.08, H 0.013, Fe 0.25, O 0.13, Ti Balance. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI on the Small Parts and Bearings website.
Leadscrew Nuts - Metric - Round - Metallic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.
Related Information:
There is also a good range of Leadscrew Nuts - Metric - Round - Metallic on the Small Parts and Bearings website.
Leadscrew Nuts - Metric - Square - Metallic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
Related Information:
There is also a good range of Leadscrew Nuts - Metric - Square - Metallic on the Small Parts and Bearings website.
Washers - Flat - Sintered Bronze - Precision
Also see combined categories:
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Flat thrust washers made from oil impregnated sintered bronze
Related Information:
There is also a good range of Washers - Flat - Sintered Bronze - Precision on the Small Parts and Bearings website.
Bushes - Plastic - Rulon J - Flanged
Max Load: 5.2 MPa (750 psi). Gold colour. Max surface speed: 2m/s. Max PV: 0.26 (Mpa x m/s)
Non Metallic Bushes. Excellent insulator. Nor suitable for steam or wet conditions. Not FDA compliant. Suitable for dry conditions or vacuum. 288 oC (550 Deg F) Maximum Working Temperature. Patented all polymeric PTFE compound which operates well against soft mating surfaces. Lowest co-efficient of friction in the Rulon(R) product range.
Related Information:
There is also a good range of Bushes - Plastic - Rulon J - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Rulon J - Unflanged
Max Load: 5.2 MPa (750 psi). Gold colour. Max surface speed: 2m/s. Max PV: 0.26 (Mpa x m/s)
Non Metallic Bushes. Excellent insulator. Nor suitable for steam or wet conditions. Not FDA compliant. Suitable for dry conditions or vacuum. 288 oC (550 Deg F) Maximum Working Temperature. Patented all polymeric PTFE compound which operates well against soft mating surfaces. Lowest co-efficient of friction in the Rulon(R) product range.
Related Information:
There is also a good range of Bushes - Plastic - Rulon J - Unflanged on the Small Parts and Bearings website.
Balls - Ceramic - Ruby - Synthetic
Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Specific Gravity: 3.98.
Related Information:
There is also a good range of Balls - Ceramic - Ruby - Synthetic on the Small Parts and Bearings website.
Balls - Ceramic - Sapphire - Synthetic
Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Specific Gravity: 3.98. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Transparent (refractive index 1.76).
Related Information:
There is also a good range of Balls - Ceramic - Sapphire - Synthetic on the Small Parts and Bearings website.
Balls - Ceramic - Silicon Nitride
Outstanding wear resistance. Good thermal and chemical resistance.
High hardness. Grades shown are AFBMA / ISO3290-1. High strength over a wide temperature range. High fracture toughness. Outstanding wear resistance. Good thermal and chemical resistance.
Related Information:
There is also a good range of Balls - Ceramic - Silicon Nitride on the Small Parts and Bearings website.
Balls - Ceramic - Zirconia
Outstanding wear resistance. Excellent thermal and chemical resistance.
Grades shown are AFBMA / ISO3290-1.
Related Information:
There is also a good range of Balls - Ceramic - Zirconia on the Small Parts and Bearings website.
Balls - Plastic - Acetal
High intensity strength, rigidity, outstanding resistance to abrasion and most solvents.
Tolerances available on request. Acetal Copolymer. High intensity strength, rigidity, outstanding resistance to abrasion and most solvents. Standard Opaque White. Specific Gravity: 1.4.
Related Information:
There is also a good range of Balls - Plastic - Acetal on the Small Parts and Bearings website.
Balls - Plastic - Acrylic
Resistance to weather and sunlight. Good abrasion resistance.
Diametrical tolerances typically + / - 0.08 or 0.13 mm depending on size. Acrylic (Methyl Methacrylate). Resistance to weather and sunlight. Good abrasion resistance. Water clear transparent. Polished. Ground and Polished.
Related Information:
There is also a good range of Balls - Plastic - Acrylic on the Small Parts and Bearings website.
Balls - Plastic - Bored
Bored acetal balls as used in plastic rod ends.
Maintenance Free - Self Lubricating. Corrosion Resistant Iglidur W300 material. Suitable for rotating, oscillating and linear movement. Lightweight.
Related Information:
There is also a good range of Balls - Plastic - Bored on the Small Parts and Bearings website.
Balls - Plastic - Nylon
Resists alkalies, weak acids and most organic solvents.
Tolerances available on request. Nylon (Polyamide 6/6). Resists alkalies, weak acids and most organic solvents. Low water absorption. Unpolished. Specific Gravity: 1.14.
Related Information:
There is also a good range of Balls - Plastic - Nylon on the Small Parts and Bearings website.
Balls - Plastic - Polypropylene
Excellent for liquid level float applications.
Tolerance and sphericity: up to and including 25.4mm diameter = + / -0.0508mm, over 25.4mm diameter +/-0.0762mm. Very resistant to most acids and alkalies. Excellent for liquid level float applications. Unpolished. Specific Gravity: 0.91.
Related Information:
There is also a good range of Balls - Plastic - Polypropylene on the Small Parts and Bearings website.
Balls - Plastic - PTFE
No water absorption. Temperatures up to 288 Deg C.
Tolerances available on request. Not affected by any known acids or alkalies. No water absorption. Temperatures up to 288 oC. Unpolished. Specific Gravity: 2.3.
Related Information:
There is also a good range of Balls - Plastic - PTFE on the Small Parts and Bearings website.
Balls - Plastic - PVC
Polyvinyl chloride. PVC is a chemically stable material, which shows little change in molecular structure, and also exhibits little change in its mechanical strength.
Polyvinyl chloride is a widely used and inexpensive thermoplastic polymer. It is easily worked or machined and has good chemical and biological resistance. It is relatively hard and can be polished to a shine. Polyvinyl chloride is a widely used and inexpensive thermoplastic polymer. Heat Deflection Temperature 176 F / 80 C. Rockwell Hardness 115. Zero water absorption in 24 hours.
Related Information:
There is also a good range of Balls - Plastic - PVC on the Small Parts and Bearings website.
Balls - Plastic - Torlon
TorlonTM 4301 Bearing Grade Balls. Grade 1.
Polyamide-imide (TorlonTM< / sup>) Balls. Rockwell Hardness (Method A): E86 or M109-119. Specific Gravity: 1.38. Colour: Brown Opaque.
Related Information:
There is also a good range of Balls - Plastic - Torlon on the Small Parts and Bearings website.
Balls - Rubber - Santoprene 40D
A high performance thermoplastic created by cross linking EPDM rubber with Polypropylene. As an elastomer plastic it is flexible, light weight, and has very good abrasion resistance. It also has good resistance to many acids, bases and aqueous solutions.
It holds up well in both extreme hot and cold environments which can make it preferred over rubber. Common uses include; grips, knobs, handles, gaskets, and ball check valves. Specific Gravity .95 g/cc. Hardness, Shore 40D. Tensile Strength 3000 psi. Melting Point 410 F. Rohs Compliant. Not FDA compliant. This grade is slightly harder than the 87A grade. Colour usually red but some sizes are beige.
Related Information:
There is also a good range of Balls - Rubber - Santoprene 40D on the Small Parts and Bearings website.
Balls - Rubber - Santoprene 87A
A high performance thermoplastic created by cross linking EPDM rubber with Polypropylene. As an elastomer plastic it is flexible, light weight, and has very good abrasion resistance. It also has good resistance to many acids, bases and aqueous solutions.
It holds up well in both extreme hot and cold environments which can make it preferred over rubber. Common uses include; grips, knobs, handles, gaskets, and ball check valves. Specific Gravity .96 g/cc. Hardness, Shore 87A. Tensile Strength 2550 psi. Melting Point 400 F. Rohs Compliant and FDA compliant. This grade is slightly softer than the 40D grade. Colour Beige.
Related Information:
There is also a good range of Balls - Rubber - Santoprene 87A on the Small Parts and Bearings website.
Ball Transfer Units - Base Mount - Heavy Duty - Steel
Single ball bearings units for conveyor systems
There is also a good range of Ball Transfer Units - Base Mount - Heavy Duty - Steel on the Small Parts and Bearings website.
Ball Transfer Units - Dismantlable - Heavy Duty - Steel
Single ball bearings units for conveyor systems
There is also a good range of Ball Transfer Units - Dismantlable - Heavy Duty - Steel on the Small Parts and Bearings website.
Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel
Single ball bearings units for conveyor systems
There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel on the Small Parts and Bearings website.
Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel
Single ball bearings units for conveyor systems
There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel on the Small Parts and Bearings website.
Ball Transfer Units - Flange Mount - Heavy Duty - Zinc Plated
Single ball bearings units for conveyor systems
There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Zinc Plated on the Small Parts and Bearings website.
Ball Transfer Units - Flange Mount - Standard - Stainless - Deep
Single ball bearings units for conveyor systems
There is also a good range of Ball Transfer Units - Flange Mount - Standard - Stainless - Deep on the Small Parts and Bearings website.
Ball Transfer Units - Flange Mount - Standard - Stainless - Slim
Single ball bearings units for conveyor systems
There is also a good range of Ball Transfer Units - Flange Mount - Standard - Stainless - Slim on the Small Parts and Bearings website.
Ball Transfer Units - Flange Mount - Standard - Steel - Slim
Single ball bearings units for conveyor systems
There is also a good range of Ball Transfer Units - Flange Mount - Standard - Steel - Slim on the Small Parts and Bearings website.
Ball Transfer Units - Screw Stem - Brass and Aluminium
Single ball bearings units for conveyor systems
Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.
There is also a good range of Ball Transfer Units - Screw Stem - Brass and Aluminium on the Small Parts and Bearings website.
Ball Transfer Units - Screw Stem - Steel - Precision
Single ball bearings units for conveyor systems
Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.
There is also a good range of Ball Transfer Units - Screw Stem - Steel - Precision on the Small Parts and Bearings website.
Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated
Single ball bearings units for conveyor systems
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.
There is also a good range of Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated on the Small Parts and Bearings website.
Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated
Single ball bearings units for conveyor systems
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.
There is also a good range of Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated on the Small Parts and Bearings website.
Ball Slides - Crossed Roller Positioning Stages
Used for Gauging and Positioning Light to Medium Loads.
Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. Positioning Slides can be stacked for Multi axis applications. Preloaded positioning slides fully assemebled. Black Anodized Finish.
There is also a good range of Ball Slides - Crossed Roller Positioning Stages on the Small Parts and Bearings website.
Parallels - Ball
Used for handling large work in drill presses or band saw machines.
Placed between work and machine so work can be easily moved. Black Oxide finish with 9.525mm hardened steel balls. Balls are exposed both sides of sheet.
There is also a good range of Parallels - Ball on the Small Parts and Bearings website.
Bearings - Ball - Angular Contact - 440C Stainless
Including miniature sizes down to 8mm from stock and even smaller available.
Single row angular contact ball bearings.
Related Information:
There is also a good range of Bearings - Ball - Angular Contact - 440C Stainless on the Small Parts and Bearings website.
Bearings - Ball - Angular Contact - Chrome Steel
Including miniature sizes down to 8mm from stock and even smaller available.
Single row angular contact ball bearings.
Related Information:
There is also a good range of Bearings - Ball - Angular Contact - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - Angular Contact - Flanged - 440C Stainless
Single row angular contact ball bearings with flanges.
Related Information:
There is also a good range of Bearings - Ball - Angular Contact - Flanged - 440C Stainless on the Small Parts and Bearings website.
Bearings - Ball - Ceramic Hybrid
Steel Races with Si3N4 Ceramic Balls
Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC.
Related Information:
There is also a good range of Bearings - Ball - Ceramic Hybrid on the Small Parts and Bearings website.
Bearings - Ball - Double Row - Angular Contact - Chrome Steel
Double Row Ball Bearings - Angular Contact.
Related Information:
There is also a good range of Bearings - Ball - Double Row - Angular Contact - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - Double Row - Angular Contact - Stainless Steel
Double Row Ball Bearings - Angular Contact.
Related Information:
There is also a good range of Bearings - Ball - Double Row - Angular Contact - Stainless Steel on the Small Parts and Bearings website.
Bearings - Ball - Double Row - Radial - Chrome Steel
Related Information:
There is also a good range of Bearings - Ball - Double Row - Radial - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - Double Row - Self Aligning - Parallel Bore
Related Information:
There is also a good range of Bearings - Ball - Double Row - Self Aligning - Parallel Bore on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Catalogue
Ceramic Bearings List
Contact Us
Dental Bearings
Downloadable PDF Catalogue Balls
Downloadable PDF Catalogue Ceramic Bearings
Downloadable PDF Catalogue Corrosion Resistant Bearings
Downloadable PDF Catalogue Disc Springs
Downloadable PDF Catalogue Economy Bearings
Downloadable PDF Catalogue High Speed Bearings
Downloadable PDF Catalogue Metallic Bushes
Downloadable PDF Catalogue Plastic Bearings
Downloadable PDF Catalogue Sintered Bronze Bushes
Downloadable PDF Catalogue Snap Rings
Downloadable PDF Catalogue Solid Bronze Bushes
Downloadable PDF Catalogue Standard Ball Bearing Range
Downloadable PDF Catalogue Super Precision Bearings
Downloadable PDF Catalogue Thrust Bearings
Downloadable PDF Cross Reference ADR and SKF
Downloadable PDF Cross Reference Barden Bearings
Downloadable PDF Cross Reference Flocast
Downloadable PDF Cross Reference McMaster Carr
Downloadable PDF Cross Reference Miniature Precison Bearings
Downloadable PDF Cross Reference NSK and NTN
Downloadable PDF Cross Reference Reid Supply
Downloadable PDF Cross Reference SDP-SI Designatronics
Downloadable PDF Cross Reference Sintered Bronze
Freight Rates and Shipping Times
Frequently Asked Questions
Google Search
Hobby Clearance
Hobby Information
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Satellite Reaction Wheels
Shipping Rates and Times
Small Bearings
Technical
Terms
5 Axis Machine Tool Bearings
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online
Bearing Shop Online offers 28836 products in 493 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.
