Bearing Shop Online - an MBA business

Covid-19 Update!! Current supply status.

Trading by online order and email.
Outbound Deliveries: Allow a few extra days within Australia and extra 7 days for overseas deliveries.
Pre-orders and Backorders: Allow extra 7 days due to quarantine precautions.
Distributors: Most MBA distributors are open and able to contact us using the distributor phone line.

Hospitals, medical equipment repairs and manufacture and bio research teams please email us if you need emergency contacts for equipment spare parts.

Bearings Ball With Snap Ring Groove Only Chrome Steel Categories


Bearings Single Row Ball


Bearings - Ball - With Snap Ring Groove Only - Chrome Steel
Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - With Snap Ring Groove Only - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - With Snap Ring - Chrome Steel
Bearings - Ball - With Snap Ring - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with snap ring. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - With Snap Ring - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - WIR - With Snap Ring - Chrome Steel
Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - WIR - With Snap Ring - Chrome Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Grooved - Chrome Steel
Bearings - Thrust - Ball - Grooved - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Grooved - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - WIR - Chrome Steel
Bearings - Ball - WIR - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - WIR - Chrome Steel on the Small Parts and Bearings website.


Circlips - Internal - Inverted
Circlips - Internal - Inverted

Also see combined categories:
All Internal Circlips

M1308 / JV / INTV / BN830. Retaining rings. Snap Rings (USA).

Inverted lugs seat into the groove for better clearance and cleaner appearance. Good for shielded bearings that pass tightly through the bore or housing. Use recommended installation pliers.

Related Information:

There is also a good range of Circlips - Internal - Inverted on the Small Parts and Bearings website.


Bearings - Ball - Flanged - WIR - Chrome Steel
Bearings - Ball - Flanged - WIR - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - Flanged - WIR - Chrome Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Flat - Chrome Steel
Bearings - Thrust - Ball - Flat - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Flat - Chrome Steel on the Small Parts and Bearings website.


Circlips - Internal - Bevelled
Circlips - Internal - Bevelled

Also see combined categories:
All Internal Circlips

N1302 / VHO / 16631 / 9002 / N5002. Retaining rings. Snap Rings (USA).

A 15 Deg. bevel on the outside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments.

Related Information:

There is also a good range of Circlips - Internal - Bevelled on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Washers Only - Chrome Steel
Bearings - Thrust - Ball - Washers Only - Chrome Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Carbon Steel Washers are hardened to RC59.61.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Washers Only - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - Chrome Steel
Bearings - Ball - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Chrome steel radial ball bearings.

Standard single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - Flanged - Chrome Steel
Bearings - Ball - Flanged - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - Flanged - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - Angular Contact - Chrome Steel
Bearings - Ball - Angular Contact - Chrome Steel

Also see combined categories:
All Angular Contact Bearings

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Related Information:

There is also a good range of Bearings - Ball - Angular Contact - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - High Precision - Chrome Steel
Bearings - Ball - High Precision - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Chrome Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:


Bearings - Ball - Double Row - Radial - Chrome Steel
Bearings - Ball - Double Row - Radial - Chrome Steel

Also see combined categories:
All Double Row Ball Bearings


Related Information:

There is also a good range of Bearings - Ball - Double Row - Radial - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - Double Row - Angular Contact - Chrome Steel
Bearings - Ball - Double Row - Angular Contact - Chrome Steel

Also see combined categories:
All Double Row Ball Bearings

Double Row Ball Bearings - Angular Contact.


Related Information:

There is also a good range of Bearings - Ball - Double Row - Angular Contact - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - Textile Industry
Bearings - Ball - Textile Industry


Special Design Stainless and Chrome Steel Bearings for the Textile Industry.

Bearings in this category often have special features. Designed for use in textile industry machinery.

Related Information:

There is also a good range of Bearings - Ball - Textile Industry on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Grooved - Stainless Steel on the Small Parts and Bearings website.


Bearings - Ball - WIR - 440C Stainless
Bearings - Ball - WIR - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - WIR - 440C Stainless on the Small Parts and Bearings website.


Circlips - External - Round Section
Circlips - External - Round Section

Also see combined categories:
All External Circlips

DIN7993A / RW / BN825. Retaining rings. Snap Rings (USA).

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.

Related Information:

There is also a good range of Circlips - External - Round Section on the Small Parts and Bearings website.


Circlips - Internal - Round Section
Circlips - Internal - Round Section

Also see combined categories:
All Internal Circlips

Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA).

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.

Related Information:

There is also a good range of Circlips - Internal - Round Section on the Small Parts and Bearings website.


Bearings - Gothic Groove Profile OD
Bearings - Gothic Groove Profile OD


Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.

Related Information:

There is also a good range of Bearings - Gothic Groove Profile OD on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Flat - Stainless Steel on the Small Parts and Bearings website.


Circlips - External - Standard - Carbon Steel
Circlips - External - Standard - Carbon Steel

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Plain carbon steel.

Related Information:

There is also a good range of Circlips - External - Standard - Carbon Steel on the Small Parts and Bearings website.


Bearings - Ball - Flanged - WIR - 440C Stainless
Bearings - Ball - Flanged - WIR - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - Flanged - WIR - 440C Stainless on the Small Parts and Bearings website.


Circlips - External - Standard - Stainless Steel
Circlips - External - Standard - Stainless Steel

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / D1400 / N1400 / D1460. 420 Stainless Steel. Retaining rings. Snap Rings (USA).

420 Stainless Steel.

Related Information:

There is also a good range of Circlips - External - Standard - Stainless Steel on the Small Parts and Bearings website.


Circlips - Internal - Standard - Carbon Steel
Circlips - Internal - Standard - Carbon Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Plain carbon steel. Tolerances on request. Standard and heavy duty options.

Related Information:

There is also a good range of Circlips - Internal - Standard - Carbon Steel on the Small Parts and Bearings website.


Bearings - Ball - WIR - High Precision - 440C Stainless
Bearings - Ball - WIR - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings with extended inner ring (wide inner ring). True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

There is also a good range of Bearings - Ball - WIR - High Precision - 440C Stainless on the Small Parts and Bearings website.


Circlips - External - Inverted
Circlips - External - Inverted

Also see combined categories:
All External Circlips

N1408 / SHI / 16626 / 4100 / 5108 - Spring Steel and Stainless Steel. Retaining rings. Snap Rings (USA).

Tapered section ring with lugs inverted on the ID to allow use in tight areas with minimal clearance. Less thrust load than standard circlips.

Related Information:

There is also a good range of Circlips - External - Inverted on the Small Parts and Bearings website.


Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless
Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

There is also a good range of Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless on the Small Parts and Bearings website.


Washers - Disc Spring - Ball Bearing Type
Washers - Disc Spring - Ball Bearing Type

Also see combined categories:
All Disc Springs

Specially designed for preloading the outer ring of ball bearings. C1075 steel. Also known as belleville washers.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.

There is also a good range of Washers - Disc Spring - Ball Bearing Type on the Small Parts and Bearings website.


Circlips - Internal - Standard - Stainless Steel
Circlips - Internal - Standard - Stainless Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. 420 Stainless Steel. Retaining rings. Snap Rings (USA).

420 Stainless Steel. Tolerances on request. Standard and heavy duty options.

Related Information:

There is also a good range of Circlips - Internal - Standard - Stainless Steel on the Small Parts and Bearings website.


Circlips - External - Standard - Zinc Plated
Circlips - External - Standard - Zinc Plated

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel.

Related Information:

There is also a good range of Circlips - External - Standard - Zinc Plated on the Small Parts and Bearings website.


Spiral Rings - External - Heavy Duty
Spiral Rings - External - Heavy Duty

Also see combined categories:
All External Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.

There is also a good range of Spiral Rings - External - Heavy Duty on the Small Parts and Bearings website.


Spiral Rings - Internal - Heavy Duty
Spiral Rings - Internal - Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.

There is also a good range of Spiral Rings - Internal - Heavy Duty on the Small Parts and Bearings website.


Housings - Bearing - Flanged - Offset - Cast Iron
Housings - Bearing - Flanged - Offset - Cast Iron


Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

There is also a good range of Housings - Bearing - Flanged - Offset - Cast Iron on the Small Parts and Bearings website.


Housings - Bearing - Flanged - Round - Cast Iron
Housings - Bearing - Flanged - Round - Cast Iron


Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

There is also a good range of Housings - Bearing - Flanged - Round - Cast Iron on the Small Parts and Bearings website.


Housings - Bearing - Flanged - Square - Cast Iron
Housings - Bearing - Flanged - Square - Cast Iron


Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

There is also a good range of Housings - Bearing - Flanged - Square - Cast Iron on the Small Parts and Bearings website.


Housings - Bearing - Pillow Block - Cast Iron
Housings - Bearing - Pillow Block - Cast Iron


Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

There is also a good range of Housings - Bearing - Pillow Block - Cast Iron on the Small Parts and Bearings website.


Circlips - Internal - Standard - Zinc Plated
Circlips - Internal - Standard - Zinc Plated

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel. Tolerances on request. Standard and heavy duty options.

Related Information:

There is also a good range of Circlips - Internal - Standard - Zinc Plated on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Double Row - Open
Bearings - Ball - 316 Stainless Steel - Double Row - Open

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Double Row - Open on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Open on the Small Parts and Bearings website.


Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron
Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron


Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

There is also a good range of Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Washers Only - Stainless Steel
Bearings - Thrust - Ball - Washers Only - Stainless Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Washers Only - Stainless Steel on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Small Parts and Bearings website.


Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium
Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium


Starting at 8mm bore size, aluminium silver series housings with removable chrome steel bearing


There is also a good range of Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Small Parts and Bearings website.


Bearings - Linear - Ball - Miniature - Super High Precision
Bearings - Linear - Ball - Miniature - Super High Precision

Also see combined categories:
All Closed Linear Ball Bearings

High Precision Corrosion Resistant Miniature Linear Bearings.

High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.

Related Information:

There is also a good range of Bearings - Linear - Ball - Miniature - Super High Precision on the Small Parts and Bearings website.


Bearings - Ball - AISI304 Stainless Steel
Bearings - Ball - AISI304 Stainless Steel

Also see combined categories:
All 300 Grade Stainless Bearings

Corrosion and Heat resistance - Non Magnetic - Non Hardenable. Quality Japanese manufacture.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm up to 10mm bore, Width +0/- 0.12 mm. Mid range speed and load between 304 stainless and 440C stainless. Rubber seals are Nitrile but fluorine rubber may be available on request. Cages, balls, races and shields from AISI 304 Stainless Steel.

Related Information:


Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

There is also a good range of Bearings - Linear - Ball - Stainless Steel - Closed on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online

Bearing Shop Online offers 25692 products in 537 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online

Bearing Shop Online offers 25692 products in 537 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.