Bearing Shop Online - an MBA business

Bearings Grooved Profile Categories


Bearings - U Groove Profile OD
Bearings - U Groove Profile OD

Also see combined categories:
All U Groove Bearings and Pulleys

Special OD Bearings.

Contact us for tolerances.

Related Information:

There is also a good range of Bearings - U Groove Profile OD on the Small Parts and Bearings website.


Bearings - Square Groove Profile OD
Bearings - Square Groove Profile OD


Special bearings. Not readily available.


There is also a good range of Bearings - Square Groove Profile OD on the Small Parts and Bearings website.


Bearings - Vee Groove Profile OD
Bearings - Vee Groove Profile OD


Special OD Bearings.


Related Information:

There is also a good range of Bearings - Vee Groove Profile OD on the Small Parts and Bearings website.


You may also be interested in

Bearings Thrust


Bearings - Thrust - Ball - Grooved - Chrome Steel
Bearings - Thrust - Ball - Grooved - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Grooved - Chrome Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic
Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Grooved - Stainless Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic
Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Full ceramic silicon nitride.

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic on the Small Parts and Bearings website.


Dual Vee Bearings


Dual Vee - Adaptor Bushings
Dual Vee - Adaptor Bushings

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller bushings.

Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned.

Related Information:

There is also a good range of Dual Vee - Adaptor Bushings on the Small Parts and Bearings website.


Dual Vee - Guide Wheels
Dual Vee - Guide Wheels

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller guide wheels with Abec 5 precision bearings.

Match with correct Track Size.

Related Information:

There is also a good range of Dual Vee - Guide Wheels on the Small Parts and Bearings website.


Dual Vee - Guide Wheels - Studded
Dual Vee - Guide Wheels - Studded

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller guide wheels.

Match with correct Track Size. Note! OD is reference only. Allow up to 1.2 mm larger than listed.

Related Information:

There is also a good range of Dual Vee - Guide Wheels - Studded on the Small Parts and Bearings website.


Dual Vee - Tracks with Mounting Holes - Steel
Dual Vee - Tracks with Mounting Holes - Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

There is also a good range of Dual Vee - Tracks with Mounting Holes - Steel on the Small Parts and Bearings website.


Dual Vee - Tracks without Mounting Holes - Steel
Dual Vee - Tracks without Mounting Holes - Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

There is also a good range of Dual Vee - Tracks without Mounting Holes - Steel on the Small Parts and Bearings website.


Dual Vee - Tracks with Mounting Holes - Stainless Steel
Dual Vee - Tracks with Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

There is also a good range of Dual Vee - Tracks with Mounting Holes - Stainless Steel on the Small Parts and Bearings website.


Dual Vee - Tracks without Mounting Holes - Stainless Steel
Dual Vee - Tracks without Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

There is also a good range of Dual Vee - Tracks without Mounting Holes - Stainless Steel on the Small Parts and Bearings website.


Bearings Special Purpose


Bearings - Gothic Groove Profile OD
Bearings - Gothic Groove Profile OD


Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.

Related Information:

There is also a good range of Bearings - Gothic Groove Profile OD on the Small Parts and Bearings website.


Clamping Rings


Spiral Rings - External - Heavy Duty
Spiral Rings - External - Heavy Duty

Also see combined categories:
All External Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.

There is also a good range of Spiral Rings - External - Heavy Duty on the Small Parts and Bearings website.


Spiral Rings - Internal - Heavy Duty
Spiral Rings - Internal - Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.

There is also a good range of Spiral Rings - Internal - Heavy Duty on the Small Parts and Bearings website.


Bearings Single Row Ball


Bearings - Ball - With Snap Ring Groove Only - Chrome Steel
Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - With Snap Ring Groove Only - Chrome Steel on the Small Parts and Bearings website.


Bearings and Housings Insert


Housings - Bearing - Flanged - Offset - Cast Iron
Housings - Bearing - Flanged - Offset - Cast Iron


Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

There is also a good range of Housings - Bearing - Flanged - Offset - Cast Iron on the Small Parts and Bearings website.


Housings - Bearing - Flanged - Round - Cast Iron
Housings - Bearing - Flanged - Round - Cast Iron


Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

There is also a good range of Housings - Bearing - Flanged - Round - Cast Iron on the Small Parts and Bearings website.


Housings - Bearing - Flanged - Square - Cast Iron
Housings - Bearing - Flanged - Square - Cast Iron


Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

There is also a good range of Housings - Bearing - Flanged - Square - Cast Iron on the Small Parts and Bearings website.


Housings - Bearing - Pillow Block - Cast Iron
Housings - Bearing - Pillow Block - Cast Iron


Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

There is also a good range of Housings - Bearing - Pillow Block - Cast Iron on the Small Parts and Bearings website.


Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron
Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron


Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

There is also a good range of Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron on the Small Parts and Bearings website.


Rollers


Rollers - Bearing - Nylon Covered
Rollers - Bearing - Nylon Covered

Also see combined categories:
All Tyred OD Bearings
All Rollers

Nylon tyred rollers for heavy duty applications

Nylon tyre (tire) covering a precision deep groove radial ball bearings.

Related Information:

There is also a good range of Rollers - Bearing - Nylon Covered on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Washers Only - Chrome Steel
Bearings - Thrust - Ball - Washers Only - Chrome Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Carbon Steel Washers are hardened to RC59.61.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Washers Only - Chrome Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Washers Only - Stainless Steel
Bearings - Thrust - Ball - Washers Only - Stainless Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Washers Only - Stainless Steel on the Small Parts and Bearings website.


Bearings - Acetal - Disk Cleaning Applications
Bearings - Acetal - Disk Cleaning Applications


Special acetal bearings for disk cleaning


There is also a good range of Bearings - Acetal - Disk Cleaning Applications on the Small Parts and Bearings website.


Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Double Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls on the Small Parts and Bearings website.


Bearings - Acetal - Double Row - with Glass Balls
Bearings - Acetal - Double Row - with Glass Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Double Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Double Row - with Glass Balls on the Small Parts and Bearings website.


Bearings - Acetal - MRI Table
Bearings - Acetal - MRI Table


Special acetal bearings for MRI table wheels


There is also a good range of Bearings - Acetal - MRI Table on the Small Parts and Bearings website.


Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls on the Small Parts and Bearings website.


Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls on the Small Parts and Bearings website.


Bearings - Acetal - Single Row - with Glass Balls
Bearings - Acetal - Single Row - with Glass Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Single Row - with Glass Balls on the Small Parts and Bearings website.


Bearings - Acetal - Special Purpose
Bearings - Acetal - Special Purpose


Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems


There is also a good range of Bearings - Acetal - Special Purpose on the Small Parts and Bearings website.


Bearings - Acetal - Special Types
Bearings - Acetal - Special Types


Light duty acetal bearings used for drawer runners, light duty tracks, garage doors and more.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

There is also a good range of Bearings - Acetal - Special Types on the Small Parts and Bearings website.


Bearings for Pool Equipment
Bearings for Pool Equipment


Acetal bearings for spa jets and pool vacuum wheels

No lubrication required other than the water they are running in.

Related Information:

There is also a good range of Bearings for Pool Equipment on the Small Parts and Bearings website.


Bearings - Polypropylene - Special Types
Bearings - Polypropylene - Special Types


Polypropylene is for special chemical compatibility usages. Please refer to a compatibility chart.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

There is also a good range of Bearings - Polypropylene - Special Types on the Small Parts and Bearings website.


Bearings - Ball - Angular Contact - 440C Stainless
Bearings - Ball - Angular Contact - 440C Stainless

Also see combined categories:
All Angular Contact Bearings

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Related Information:

There is also a good range of Bearings - Ball - Angular Contact - 440C Stainless on the Small Parts and Bearings website.


Bearings - Ball - Angular Contact - Chrome Steel
Bearings - Ball - Angular Contact - Chrome Steel

Also see combined categories:
All Angular Contact Bearings

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Related Information:

There is also a good range of Bearings - Ball - Angular Contact - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - Angular Contact - Flanged - 440C Stainless
Bearings - Ball - Angular Contact - Flanged - 440C Stainless

Also see combined categories:
All Angular Contact Bearings

Single row angular contact ball bearings with flanges.

Related Information:

There is also a good range of Bearings - Ball - Angular Contact - Flanged - 440C Stainless on the Small Parts and Bearings website.


Bearings - Tapered Roller - Single Row - Inch Sets
Bearings - Tapered Roller - Single Row - Inch Sets


Common automotive sets include cup and cone



Bearings - Ball - Ceramic Hybrid
Bearings - Ball - Ceramic Hybrid

Also see combined categories:
All Radial Ball Bearings

Steel Races with Si3N4 Ceramic Balls

Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC.

Related Information:

There is also a good range of Bearings - Ball - Ceramic Hybrid on the Small Parts and Bearings website.


Bearings - Ceramic Si3N4 - Angular Contact
Bearings - Ceramic Si3N4 - Angular Contact

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic Si3N4 - Angular Contact on the Small Parts and Bearings website.


Bearings - Ceramic Si3N4 - Radial
Bearings - Ceramic Si3N4 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic Si3N4 - Radial on the Small Parts and Bearings website.


Bearings - Ceramic ZrO2 - Radial
Bearings - Ceramic ZrO2 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic ZrO2 - Radial on the Small Parts and Bearings website.


Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row on the Small Parts and Bearings website.


Bearings - Clutch Release - TNK Type
Bearings - Clutch Release - TNK Type

Also see combined categories:
All Clutch Release Bearings



Bearings - Conveyor - Hex Bore - Plastic - Double Row
Bearings - Conveyor - Hex Bore - Plastic - Double Row

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended.

There is also a good range of Bearings - Conveyor - Hex Bore - Plastic - Double Row on the Small Parts and Bearings website.


Bearings - Conveyor - Hex Bore - Plastic - Single Row
Bearings - Conveyor - Hex Bore - Plastic - Single Row

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended.

There is also a good range of Bearings - Conveyor - Hex Bore - Plastic - Single Row on the Small Parts and Bearings website.


Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row
Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row

Also see combined categories:
All Conveyor Bearings

316 stainless conveyor bearings with plastic cage and plastic hex insert

Loads and Speeds are for reference only. Testing recommended.

There is also a good range of Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online

Bearing Shop Online offers 25626 products in 541 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online

Bearing Shop Online offers 25626 products in 541 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.