Bearing Shop Online - an MBA business

Bearings One Way Roller


Bearings One Way Clutch


Bearings - One Way - Roller
Bearings - One Way - Roller

Also see combined categories:
All One Way Clutch Bearings

Roller Clutch Bearings rotate in one direction only.

Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm.

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - One Way - Roller on the Small Parts and Bearings website.

You may also like

Bearings Cylindrical Roller


Bearings - Roller - Cylindrical - NF Series - Removable Outer Ring
Bearings - Roller - Cylindrical - NF Series - Removable Outer Ring

Also see combined categories:
All Cylindrical Roller Bearings

Outer ring is removable in one direction


Bearings - Roller - Cylindrical - NJ Series - Removable Inner Ring
Bearings - Roller - Cylindrical - NJ Series - Removable Inner Ring

Also see combined categories:
All Cylindrical Roller Bearings

Inner ring is removable in one direction and shouldered on the opposite side


Bearings - Roller - Cylindrical - NUP Series - Removable Inner Ring
Bearings - Roller - Cylindrical - NUP Series - Removable Inner Ring

Also see combined categories:
All Cylindrical Roller Bearings

Inner ring is removable in one direction with supporting shoulder washer


Bearings Tapered Roller


Bearings - Tapered Roller - Cone
Bearings - Tapered Roller - Cone

Replacements for existing tapered roller cones (inner part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.


There is also a good range of Bearings - Tapered Roller - Cone on the Small Parts and Bearings website.

Linear Slides


Linear Slides - Cross Roller Tables - Aluminium
Linear Slides - Cross Roller Tables - Aluminium

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


There is also a good range of Linear Slides - Cross Roller Tables - Aluminium on the Small Parts and Bearings website.

Linear Slides - Cross Roller Tables - Steel
Linear Slides - Cross Roller Tables - Steel

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


There is also a good range of Linear Slides - Cross Roller Tables - Steel on the Small Parts and Bearings website.

Bearings Tapered Roller


Bearings - Tapered Roller - Single Row - Metric
Bearings - Tapered Roller - Single Row - Metric

Includes cup and cone


There is also a good range of Bearings - Tapered Roller - Single Row - Metric on the Small Parts and Bearings website.

Bearings Automotive


Bearings - Tapered Roller - Single Row - Inch Sets
Bearings - Tapered Roller - Single Row - Inch Sets

Common automotive sets include cup and cone


There is also a good range of Bearings - Tapered Roller - Single Row - Inch Sets on the Small Parts and Bearings website.

Linear Slides


Linear Slides - Low Profile - Crossed Roller Table - Aluminium
Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


There is also a good range of Linear Slides - Low Profile - Crossed Roller Table - Aluminium on the Small Parts and Bearings website.

Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel
Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


There is also a good range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel on the Small Parts and Bearings website.

Bearings Cylindrical Roller




Bearings - Roller - Cylindrical - N Series - Removable Outer Ring
Bearings - Roller - Cylindrical - N Series - Removable Outer Ring

Also see combined categories:
All Cylindrical Roller Bearings

Outer ring is removable in both directions


Bearings - Roller - Cylindrical - NU Series - Removable Inner Ring
Bearings - Roller - Cylindrical - NU Series - Removable Inner Ring

Also see combined categories:
All Cylindrical Roller Bearings

Inner ring is removable in both directions


Bearings Spherical Roller


Bearings - Roller - Spherical - Parallel Bore
Bearings - Roller - Spherical - Parallel Bore

Also see combined categories:
All Spherical Roller Bearings

Heavy duty parallel bore double row spherical roller bearings

Related Information:
Adaptor Sleeves

Bearings - Roller - Spherical - Tapered Bore - 21305K to 21322K Series
Bearings - Roller - Spherical - Tapered Bore - 21305K to 21322K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H300 Series Adaptor Sleeves or AH300 Series Withdrawal Sleeves.

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:
Adaptor Sleeves

Bearings - Roller - Spherical - Tapered Bore - 22205K to 22222K Series
Bearings - Roller - Spherical - Tapered Bore - 22205K to 22222K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H300 Series Adaptor Sleeves or AH300 Series Withdrawal Sleeves.

Related Information:
Adaptor Sleeves

Bearings - Roller - Spherical - Tapered Bore - 22224K to 22264K
Bearings - Roller - Spherical - Tapered Bore - 22224K to 22264K

Also see combined categories:
All Spherical Roller Bearings

Use with H3100 Series Adaptor Sleeves. AH3100 Withdrawal sleeves up to 22234K and AH2200 withdrawal sleeves from 22236K to 22264K

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:
Adaptor Sleeves

Bearings - Roller - Spherical - Tapered Bore - 22308K to 22356K Series
Bearings - Roller - Spherical - Tapered Bore - 22308K to 22356K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H2300 Series Adaptor Sleeves or AH2300 Withdrawal Sleeves

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:
Adaptor Sleeve

Bearings - Roller - Spherical - Tapered Bore - 23024K to 230-500K Series
Bearings - Roller - Spherical - Tapered Bore - 23024K to 230-500K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H3000 Series Adaptor Sleeves

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:
Adaptor Sleeves

Bearings - Roller - Spherical - Tapered Bore - 23100K to 231-500K Series
Bearings - Roller - Spherical - Tapered Bore - 23100K to 231-500K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H3100 Series Adaptor Sleeves

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:
Adaptor Sleeves

Bearings - Roller - Spherical - Tapered Bore - 23218K to 23256K Series
Bearings - Roller - Spherical - Tapered Bore - 23218K to 23256K Series

Also see combined categories:
All Spherical Roller Bearings

Use with H2300 Series Adaptor Sleeves. AH3200 Withdrawal sleeves up to 23240K and AH2300 withdrawal sleeves from 23244K to 23256K

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.

Related Information:
Adaptor Sleeve

Bearings - Roller - Spherical - Tapered Bore - 24000K Series
Bearings - Roller - Spherical - Tapered Bore - 24000K Series

Also see combined categories:
All Spherical Roller Bearings

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.


Bearings - Roller - Spherical - Tapered Bore - 24100K Series
Bearings - Roller - Spherical - Tapered Bore - 24100K Series

Also see combined categories:
All Spherical Roller Bearings

Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.


Rollers


Rollers - Bearing - Nylon Covered
Rollers - Bearing - Nylon Covered

Also see combined categories:
All Tyred OD Bearings
All Rollers

Nylon tyred rollers for heavy duty applications

Nylon tyre (tire) covering a precision deep groove radial ball bearings.

Related Information:
See also Wheels

There is also a good range of Rollers - Bearing - Nylon Covered on the Small Parts and Bearings website.

Bearings One Way Clutch


Bearings - One Way - Sprag - Standard
Bearings - One Way - Sprag - Standard

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - One Way - Sprag - Standard on the Small Parts and Bearings website.

Bearings Needle Roller


Bearings - Needle Roller - Cage Type
Bearings - Needle Roller - Cage Type

Cage and Rollers.

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Needle Roller - Cage Type on the Small Parts and Bearings website.

Bearings - Needle Roller - Inner Rings
Bearings - Needle Roller - Inner Rings

Hardened sleeves for needle roller bearings.

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Needle Roller - Inner Rings on the Small Parts and Bearings website.

Bearings - Needle Roller - Machined - With Inner Ring
Bearings - Needle Roller - Machined - With Inner Ring

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Needle Roller - Machined - With Inner Ring on the Small Parts and Bearings website.


Bearings - Needle Roller - Shell Type - Closed End
Bearings - Needle Roller - Shell Type - Closed End

Light Weight. Compact Design.

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Needle Roller - Shell Type - Closed End on the Small Parts and Bearings website.

Bearings - Needle Roller - Shell Type - Open Ends
Bearings - Needle Roller - Shell Type - Open Ends

Light Weight. Compact Design.

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Needle Roller - Shell Type - Open Ends on the Small Parts and Bearings website.

Bearings Tapered Roller


Bearings - Tapered Roller - Cup
Bearings - Tapered Roller - Cup

Replacements for existing tapered roller cups (outer part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.


There is also a good range of Bearings - Tapered Roller - Cup on the Small Parts and Bearings website.

Bearings Thrust



Bearings - Thrust - Roller - Cage and Rollers Only
Bearings - Thrust - Roller - Cage and Rollers Only

Also see combined categories:
All Roller Thrust Cages and Washers

Washers and Rollers sold separately. Match cage and roller assembly with washers from the washers category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:
Washers to suit cage and rollers
Other Thrust Bearings
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Thrust - Roller - Cage and Rollers Only on the Small Parts and Bearings website.

Bearings - Thrust - Roller - Washers
Bearings - Thrust - Roller - Washers

Also see combined categories:
All Roller Thrust Cages and Washers

Washers and Rollers sold separately. Match washers with cage and roller assembly from the cage and roller assembly category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:
Cage and rollers to suit these washers
Other Thrust Bearings
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Thrust - Roller - Washers on the Small Parts and Bearings website.

Pressure Rollers


Bearings - Pressure Roller - With Urethane OD
Bearings - Pressure Roller - With Urethane OD

Also see combined categories:
All Tyred OD Bearings
All Rollers

Bearings with Urethane Tyre on OD for applications requiring frictional movement.

For applications including paper and card dispensing and rolling (eg ATM Machines).

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Pressure Roller - With Urethane OD on the Small Parts and Bearings website.

Bearings Mounted


Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning
Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning

Also see combined categories:
All Press In Bearings

Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Stee black oxide finish. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer. Non aligning.

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning on the Small Parts and Bearings website.

Rollers


Rollers - Idler - With Plain Sintered Bearing
Rollers - Idler - With Plain Sintered Bearing

Also see combined categories:
All Tyred OD Bearings
All Rollers

Related Information:
See also Wheels

There is also a good range of Rollers - Idler - With Plain Sintered Bearing on the Small Parts and Bearings website.

Bearings Mounted


Bearings - Self Clinching - Self Aligning - Needle Roller
Bearings - Self Clinching - Self Aligning - Needle Roller

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:
Datasheets
Case Studies and Info - Click then scroll to Spyraflo

There is also a good range of Bearings - Self Clinching - Self Aligning - Needle Roller on the Small Parts and Bearings website.

Housings - Flanged - Self Aligning - Needle Roller
Housings - Flanged - Self Aligning - Needle Roller

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning needle roller bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:
Datasheets
Case Studies and Info - Click then scroll to Spyraflo

There is also a good range of Housings - Flanged - Self Aligning - Needle Roller on the Small Parts and Bearings website.

Housings - Flange Mount - Non Aligning - Needle Roller
Housings - Flange Mount - Non Aligning - Needle Roller

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile flange mounted needle roller bearings

See links at bottom of web page for more information.

Related Information:
Datasheets
Case Studies and Info - Click then scroll to Spyraflo

There is also a good range of Housings - Flange Mount - Non Aligning - Needle Roller on the Small Parts and Bearings website.

Housings - Flange Mount - Self Aligning - Needle Roller
Housings - Flange Mount - Self Aligning - Needle Roller

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted needle roller bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Related Information:
Datasheets
Case Studies and Info - Click then scroll to Spyraflo

There is also a good range of Housings - Flange Mount - Self Aligning - Needle Roller on the Small Parts and Bearings website.

Housings - Pillow Block - Self Aligning - Needle Roller
Housings - Pillow Block - Self Aligning - Needle Roller

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning needle roller bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:
Datasheets
Case Studies and Info - Click then scroll to Spyraflo

There is also a good range of Housings - Pillow Block - Self Aligning - Needle Roller on the Small Parts and Bearings website.

Bearings Special Purpose


Bearings - Spherical OD
Bearings - Spherical OD

Bearings with a spherical outside diameter.

Combined listing of spherical OD track rollers and bearings for Linear Guide systems.

Related Information:
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Spherical OD on the Small Parts and Bearings website.

Dual Vee Bearings


Dual Vee - Adaptor Bushings
Dual Vee - Adaptor Bushings

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller bushings.

Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned.

Related Information:
General Information
Engineering Notes
Guide Wheels to Suit

There is also a good range of Dual Vee - Adaptor Bushings on the Small Parts and Bearings website.

Dual Vee - Guide Wheels
Dual Vee - Guide Wheels

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller guide wheels with Abec 5 precision bearings.

Match with correct Track Size.

Related Information:
General Information
Engineering Notes
Dual Vee Tracks and Accessories

There is also a good range of Dual Vee - Guide Wheels on the Small Parts and Bearings website.

Dual Vee - Guide Wheels - Studded
Dual Vee - Guide Wheels - Studded

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller guide wheels.

Match with correct Track Size. Note! OD is reference only. Allow up to 1.2 mm larger than listed.

Related Information:
General Information
Engineering Notes
Dual Vee Tracks and Accessories

There is also a good range of Dual Vee - Guide Wheels - Studded on the Small Parts and Bearings website.

Bearings Thrust


Bearings - Thrust - Ball - Washers Only - Chrome Steel
Bearings - Thrust - Ball - Washers Only - Chrome Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Carbon Steel Washers are hardened to RC59.61.

Related Information:
Cage and balls to suit these washers
Other Thrust Bearings
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Thrust - Ball - Washers Only - Chrome Steel on the Small Parts and Bearings website.

Bearings - Thrust - Ball - Washers Only - Stainless Steel
Bearings - Thrust - Ball - Washers Only - Stainless Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42.

Related Information:
Cage and balls to suit these washers
Other Thrust Bearings
Precision Shafting To Suit Bearings

There is also a good range of Bearings - Thrust - Ball - Washers Only - Stainless Steel on the Small Parts and Bearings website.

Dual Vee Bearings


Dual Vee - Tracks with Mounting Holes - Steel
Dual Vee - Tracks with Mounting Holes - Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:
General Information
Engineering Notes
Guide Wheels to Suit

There is also a good range of Dual Vee - Tracks with Mounting Holes - Steel on the Small Parts and Bearings website.

Dual Vee - Tracks without Mounting Holes - Steel
Dual Vee - Tracks without Mounting Holes - Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:
General Information
Engineering Notes
Guide Wheels to Suit

There is also a good range of Dual Vee - Tracks without Mounting Holes - Steel on the Small Parts and Bearings website.

Sleeves


Sleeves - Withdrawal - AH3200
Sleeves - Withdrawal - AH3200

Also see combined categories:
All Withdrawal Sleeves

For use with tapered bore bearings

Suits 23218K to 23240K tapered bore self aligning spherical roller bearings. Suits 23260K to 232-500K tapered bore self aligning spherical roller bearings.


Dual Vee Bearings


Dual Vee - Tracks with Mounting Holes - Stainless Steel
Dual Vee - Tracks with Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:
General Information
Engineering Notes
Guide Wheels to Suit

There is also a good range of Dual Vee - Tracks with Mounting Holes - Stainless Steel on the Small Parts and Bearings website.

Dual Vee - Tracks without Mounting Holes - Stainless Steel
Dual Vee - Tracks without Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:
General Information
Engineering Notes
Guide Wheels to Suit

There is also a good range of Dual Vee - Tracks without Mounting Holes - Stainless Steel on the Small Parts and Bearings website.

Sleeves


Sleeves - Adaptor - H3000
Sleeves - Adaptor - H3000

Also see combined categories:
All Adaptor Sleeves

For use with tapered bore bearings

Suits 23024K to 230-500K tapered bore self aligning spherical roller bearings.

Related Information:
Spherical - 23024K to 230-500K Series - Roller Bearings

Sleeves - Adaptor - H3100
Sleeves - Adaptor - H3100

Also see combined categories:
All Adaptor Sleeves

For use with tapered bore bearings

Suits 23122K to 231-500K tapered bore self aligning spherical roller bearings. Suits 22224K to 22264K tapered bore self aligning spherical roller bearings.

Related Information:
Spherical - 23122K to 231-500K Series - Roller Bearings

Sleeves - Withdrawal - AH3000
Sleeves - Withdrawal - AH3000

Also see combined categories:
All Withdrawal Sleeves

For use with tapered bore bearings

Suits 23024K to 230-500K tapered bore self aligning spherical roller bearings.


Sleeves - Withdrawal - AH3100
Sleeves - Withdrawal - AH3100

Also see combined categories:
All Withdrawal Sleeves

For use with tapered bore bearings

Suits 23122K to 231-500K tapered bore self aligning spherical roller bearings. Suits 22222K to 22234K tapered bore self aligning spherical roller bearings.


Sleeves - Adaptor - H2300
Sleeves - Adaptor - H2300

Also see combined categories:
All Adaptor Sleeves

For use with tapered bore bearings

Suits 2304K to 2322K tapered bore self aligning ball bearing. Suits 23218K to 23256K tapered bore self aligning spherical roller bearings. Suits 22308K to 22356K tapered bore self aligning spherical roller bearings.

Related Information:
Double Row - Heavy Series - Self Alligning Bearings
Spherical - 23218K to 23256K Series - Roller Bearings
Spherical - 22308K to 22356K Series - Roller Bearings

Rollers


Rollers - Solid - Stud Mount - Black Neoprene
Rollers - Solid - Stud Mount - Black Neoprene

Also see combined categories:
All Solid Stud Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings.


There is also a good range of Rollers - Solid - Stud Mount - Black Neoprene on the Small Parts and Bearings website.

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Bearing Shop Online offers 25333 products in 538 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Bearing Shop Online offers 25333 products in 538 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.