Bushings Spherical Categories
Bushings - Spherical - Plastic
Plastic spherical plain bearings. Also known as ball bushings.
Ball Material W300. Housing Iglidur G. Maintenance Free. Self lubricating. Compensates for axial loads and misalignment. Corrosion resistant. High vibration dampening capacity.
There is also a good range of Bushings - Spherical - Plastic on the Small Parts and Bearings website.
Bushings - Spherical - Steel
Steel spherical plain bearings. Also known as ball bushings.
Compensates for axial loads and misalignment.
There is also a good range of Bushings - Spherical - Steel on the Small Parts and Bearings website.
Bushings - Spherical - Steel - With Oil Hole
Steel spherical plain bearings. Also known as ball bushings.
Compensates for axial loads and misalignment.
There is also a good range of Bushings - Spherical - Steel - With Oil Hole on the Small Parts and Bearings website.
Bushings - Spherical - Steel - With Oil Hole and Wiper Seal
Steel spherical plain bearings. Also known as ball bushings.
Compensates for axial loads and misalignment.
There is also a good range of Bushings - Spherical - Steel - With Oil Hole and Wiper Seal on the Small Parts and Bearings website.
Bushings - Spherical - Steel - With Wiper Seal
Steel spherical plain bearings. Also known as ball bushings.
Compensates for axial loads and misalignment.
There is also a good range of Bushings - Spherical - Steel - With Wiper Seal on the Small Parts and Bearings website.
Bushes - Bronze - Spherical - Sintered
Spherical OD Oil Impregnated Sintered Bronze Bushes.
ID and OD oversized. Enquire if details required.
Related Information:
There is also a good range of Bushes - Bronze - Spherical - Sintered on the Small Parts and Bearings website.
Bearings - Spherical OD
Bearings with a spherical outside diameter.
Combined listing of spherical OD track rollers and bearings for Linear Guide systems.
Related Information:
There is also a good range of Bearings - Spherical OD on the Small Parts and Bearings website.
Bearings - Roller - Spherical - Parallel Bore
Heavy duty parallel bore double row spherical roller bearings
Related Information:
Bearings - Roller - Spherical - Tapered Bore - 21305K to 21322K Series
Use with H300 Series Adaptor Sleeves or AH300 Series Withdrawal Sleeves.
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Roller - Spherical - Tapered Bore - 22205K to 22222K Series
Use with H300 Series Adaptor Sleeves or AH300 Series Withdrawal Sleeves.
Related Information:
Bearings - Roller - Spherical - Tapered Bore - 22224K to 22264K
Use with H3100 Series Adaptor Sleeves. AH3100 Withdrawal sleeves up to 22234K and AH2200 withdrawal sleeves from 22236K to 22264K
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Roller - Spherical - Tapered Bore - 22308K to 22356K Series
Use with H2300 Series Adaptor Sleeves or AH2300 Withdrawal Sleeves
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Roller - Spherical - Tapered Bore - 23024K to 230-500K Series
Use with H3000 Series Adaptor Sleeves
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Roller - Spherical - Tapered Bore - 23100K to 231-500K Series
Use with H3100 Series Adaptor Sleeves
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Roller - Spherical - Tapered Bore - 23218K to 23256K Series
Use with H2300 Series Adaptor Sleeves. AH3200 Withdrawal sleeves up to 23240K and AH2300 withdrawal sleeves from 23244K to 23256K
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Roller - Spherical - Tapered Bore - 24000K Series
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Bearings - Roller - Spherical - Tapered Bore - 24100K Series
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings
Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.
Load and speed calculations are for reference only. Testing is recommended.
Related Information:
There is also a good range of Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings on the Small Parts and Bearings website.
Washers - Self Aligning - Sets - Plastic
Spherical Seat Washers
Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.
Related Information:
There is also a good range of Washers - Self Aligning - Sets - Plastic on the Small Parts and Bearings website.
Bearings - For Cast Iron Housings
Insert bearings with spherical OD for use with cast iron flanged and pillow block housings.
Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request. Lubrication Hole to match Lubrication groove in housing.
Related Information:
There is also a good range of Bearings - For Cast Iron Housings on the Small Parts and Bearings website.
Bearings - For Pressed Metal Housings
Insert bearings with spherical OD for use with pressed metal flanged and pillow block housings.
Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request.
Related Information:
There is also a good range of Bearings - For Pressed Metal Housings on the Small Parts and Bearings website.
Sleeves - Withdrawal - AH3200
For use with tapered bore bearings
Suits 23218K to 23240K tapered bore self aligning spherical roller bearings. Suits 23260K to 232-500K tapered bore self aligning spherical roller bearings.
Sleeves - Adaptor - H3000
For use with tapered bore bearings
Suits 23024K to 230-500K tapered bore self aligning spherical roller bearings.
Related Information:
Sleeves - Adaptor - H3100
For use with tapered bore bearings
Suits 23122K to 231-500K tapered bore self aligning spherical roller bearings. Suits 22224K to 22264K tapered bore self aligning spherical roller bearings.
Related Information:
Sleeves - Withdrawal - AH3000
For use with tapered bore bearings
Suits 23024K to 230-500K tapered bore self aligning spherical roller bearings.
Sleeves - Withdrawal - AH3100
For use with tapered bore bearings
Suits 23122K to 231-500K tapered bore self aligning spherical roller bearings. Suits 22222K to 22234K tapered bore self aligning spherical roller bearings.
Sleeves - Adaptor - H2300
For use with tapered bore bearings
Suits 2304K to 2322K tapered bore self aligning ball bearing. Suits 23218K to 23256K tapered bore self aligning spherical roller bearings. Suits 22308K to 22356K tapered bore self aligning spherical roller bearings.
Related Information:
Bushings - Integral Taper
Stainless Steel Taper Bushings.
Will not mar shafts.
There is also a good range of Bushings - Integral Taper on the Small Parts and Bearings website.
Bushings - Drill - Liner Type - Headless
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point.
There is also a good range of Bushings - Drill - Liner Type - Headless on the Small Parts and Bearings website.
Bushings - Drill - Press-fit - Headless
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
There is also a good range of Bushings - Drill - Press-fit - Headless on the Small Parts and Bearings website.
Bushings - Drill - Press-fit - Headless - Tungsten Carbide
Designed to guide, position, and support the cutting tool in a metalworking jig.
Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point.
There is also a good range of Bushings - Drill - Press-fit - Headless - Tungsten Carbide on the Small Parts and Bearings website.
Bushings - Drill - Press-fit - Standard Head
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
There is also a good range of Bushings - Drill - Press-fit - Standard Head on the Small Parts and Bearings website.
Bushings - Drill - Slip - With Head
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point.
There is also a good range of Bushings - Drill - Slip - With Head on the Small Parts and Bearings website.
Bushings - Tension
Like a heavy duty roll pin.
Made of a high carbon spring steel with high elasticity, resilience and wear characteristics. Designed to replace solid steel tubular and case hardened bushings because they are close tolerance, self-retaining and through hard. Insertion can be easily accomplished with a hammer and drift. Ideal for high load/low-speed operation in articulating or continuous applications.
There is also a good range of Bushings - Tension on the Small Parts and Bearings website.
Bushings - Stroke Rotary - Miniature
2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.
Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100oC (Constant), +120oC (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.
Related Information:
There is also a good range of Bushings - Stroke Rotary - Miniature on the Small Parts and Bearings website.
Dual Vee - Adaptor Bushings
Vee grooved track roller bushings.
Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned.
Related Information:
There is also a good range of Dual Vee - Adaptor Bushings on the Small Parts and Bearings website.
Cam Followers - Self Lubricating - Bronze Bushing
There is also a good range of Cam Followers - Self Lubricating - Bronze Bushing on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur G - Flanged
General purpose maintenance free dry running.
Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur G - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur G - Unflanged
General purpose maintenance free dry running.
Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur G - Unflanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur H - Flanged
Underwater performance. High Temp. Chemical Resistance.
Specific Gravity 1.64 g/cm3. Operating Temp 240 C short term / 200 C long term. Tensile Strength at 20 oC = 175 Mpa. Hardness 87 Shore D (DIN53505). Bushing bore tolerance is F10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur H - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur H - Unflanged
Underwater performance. High Temp. Chemical Resistance.
Specific Gravity 1.64 g/cm3. Operating Temp 240 C short term / 200 C long term. Tensile Strength at 20 oC = 175 Mpa. Hardness 87 Shore D (DIN53505). Bushing bore tolerance is F10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur H - Unflanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur M250 - Flanged
For impact resistance vibration dampening unclean environments.
Specific Gravity 1.14 g/cm3. Operating Temp 170 C short term / 80 C long term. Tensile Strength at 20 oC = 112 Mpa. Hardness 79 Shore D (DIN53505). Bushing bore tolerance is D11 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur M250 - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur M250 - Unflanged
For impact resistance vibration dampening unclean environments.
Specific Gravity 1.14 g/cm3. Operating Temp 170 C short term / 80 C long term. Tensile Strength at 20 oC = 112 Mpa. Hardness 79 Shore D (DIN53505). Bushing bore tolerance is D11 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur M250 - Unflanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur P - Flanged
Low water absorption. Low wear. Hgh load.
Specific Gravity 1.47 g/cm3. Operating Temp 200 C short term / 130 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 75 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur P - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur P - Unflanged
Low water absorption. Low wear. Hgh load.
Specific Gravity 1.47 g/cm3. Operating Temp 200 C short term / 130 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 75 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur P - Unflanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur J - Flanged
Low Wear - Dry Running - Vibration Dampening - Chemical Resistance.
Specific Gravity 1.49 g/cm3. Operating Temp 120 C short term / 90 C long term. Tensile Strength at 20 oC = 73 Mpa. Hardness 74 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur J - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur J - Unflanged
Low Wear - Dry Running - Vibration Dampening - Chemical Resistance.
Specific Gravity 1.49 g/cm3. Operating Temp 120 C short term / 90 C long term. Tensile Strength at 20 oC = 73 Mpa. Hardness 74 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur J - Unflanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur Q - Flanged
Excellent wear resistance under high load. Resistant to dirt.
Specific Gravity 1.40 g/cm3. Operating Temp 155 C short term / 135 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 83 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur Q - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur Q - Unflanged
Excellent wear resistance under high load. Resistant to dirt.
Specific Gravity 1.40 g/cm3. Operating Temp 155 C short term / 135 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 83 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur Q - Unflanged on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Catalogue
Ceramic Bearings List
Clearance Items List
Contact Us
Dental Bearings
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Small Bearings
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online
Bearing Shop Online offers 25852 products in 532 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.
Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.
