CSK204PP SPRAG
Cross Referenced Part Numbers
Sprag part number CSK204PPMatches our part number
ID (C): 20.00. OD (B): 47.00. Width (A): 14.00.
Part Link: OW-0200-0470-0140-KK
Rec. Retail Price: 0.00
(As low as in bulk)
Stock: Pre-Order (due less than a week) Due dates are estimates only
(As low as in bulk)
Stock: Pre-Order (due less than a week) Due dates are estimates only
Category Matches
Bearings One Way Clutch
Bearings - One Way - Sprag - Standard
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.
Related Information:
There is also a good range of Bearings - One Way - Sprag - Standard on the Small Parts and Bearings website.
Bearings - One Way - Roller
Roller Clutch Bearings rotate in one direction only.
Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm.
Related Information:
There is also a good range of Bearings - One Way - Roller on the Small Parts and Bearings website.
Bass One Shimano Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
There is also a good range of Bass One Shimano Parts on the Small Parts and Bearings website.
Collars - Shaft - Clamp Type - One Piece - Stainless Steel
Related Information:
There is also a good range of Collars - Shaft - Clamp Type - One Piece - Stainless Steel on the Small Parts and Bearings website.
Collars - Shaft - Clamp Type - One Piece - Steel
Related Information:
There is also a good range of Collars - Shaft - Clamp Type - One Piece - Steel on the Small Parts and Bearings website.
Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel
There is also a good range of Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel on the Small Parts and Bearings website.
Collars - Shaft - Hex Bore - One Piece - Steel
There is also a good range of Collars - Shaft - Hex Bore - One Piece - Steel on the Small Parts and Bearings website.
Rail Supports - With Shaft - One Piece
One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.
Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.
Related Information:
There is also a good range of Rail Supports - With Shaft - One Piece on the Small Parts and Bearings website.
Lazy Susan Bearings
One unit construction for maximum stability and quiet running. Used to make light weight turntables.
Centre opening allows for a centre post if required.
Related Information:
There is also a good range of Lazy Susan Bearings on the Small Parts and Bearings website.
Linear - Mini Rail - Self-Lubricating - Carriage and Rail
Comes with one carriage. Spare carriages sold separately - match by rail width.
Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments.
Related Information:
There is also a good range of Linear - Mini Rail - Self-Lubricating - Carriage and Rail on the Small Parts and Bearings website.
Bushes - Bronze - Sintered - Unflanged - Oilite
Genuine Oilite oil impregnated sintered bronze bushes.
Genuine Oilite Sintered Bronze designed to be fitted in H7 housings and f7 shafts. Static Load: 50N per mm Sq. Dynamic Load: 15N per mm sq. Rec Speed Range: 0.3 mtr per second to 0.5 mtr per second. Limit one Pv factor no greater than 1.8 Pv (Pv= N per mm sq x mtr per second).
Related Information:
There is also a good range of Bushes - Bronze - Sintered - Unflanged - Oilite on the Small Parts and Bearings website.
Bearings - Roller - Cylindrical - NF Series - Removable Outer Ring
Outer ring is removable in one direction
Bearings - Roller - Cylindrical - NJ Series - Removable Inner Ring
Inner ring is removable in one direction and shouldered on the opposite side
Bearings - Roller - Cylindrical - NUP Series - Removable Inner Ring
Inner ring is removable in one direction with supporting shoulder washer
Bushes - Bronze - Sintered - Flanged - Oilite
Genuine Oilite flanged oil impregnated sintered bronze bushes.
Genuine Oilite Sintered Bronze designed to be fitted in H7 housings and f7 shafts. Static Load: 50N per mm Sq. Dynamic Load: 15N per mm sq. Rec Speed Range: 0.3 mtr per second to 0.5 mtr per second. Limit one Pv factor no greater than 1.8 Pv (Pv= N per mm sq x mtr per second).
Related Information:
There is also a good range of Bushes - Bronze - Sintered - Flanged - Oilite on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - Chrome Steel
3 Piece Thrust Bearings Open Type
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Grooved - Chrome Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - Stainless Steel
3 Piece Thrust Bearings Open Type
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Grooved - Stainless Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Flat - Chrome Steel
3 Piece Thrust Bearings Open Type with Flat Washers
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Flat - Chrome Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Flat - Stainless Steel
3 Piece Thrust Bearings Open Type with Flat Washers
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Flat - Stainless Steel on the Small Parts and Bearings website.
Bearings - Ball - Ceramic Hybrid
Steel Races with Si3N4 Ceramic Balls
Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC.
Related Information:
There is also a good range of Bearings - Ball - Ceramic Hybrid on the Small Parts and Bearings website.
Linear - Mini Rail - Self-Lubricating - Carriage
Additional carriages for the Mini-Rail system. Match by rail width.
Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments.
Related Information:
There is also a good range of Linear - Mini Rail - Self-Lubricating - Carriage on the Small Parts and Bearings website.
Oil Seals - Nitrile Rubber
DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifically required please let us know when ordering.
Operating Temp. Range: -30oC to +90oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.
There is also a good range of Oil Seals - Nitrile Rubber on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic
3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Full ceramic silicon nitride.
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic on the Small Parts and Bearings website.
Linear Slides - MiniVee - Carriages
Use with MiniVee tracks and support washers
Low profile miniature linear slide system ideal for semi-conductor, laboratory, medical and packaging applications. Non actuated MiniVee linear slide consists of one or more 6061-T6 anodised aluminium wheel carriages with Dual Vee integrated wheels. Steel wheel carriages support loads to 50kg whilst the polymer wheel carriages support loads to 6kg. Carriages and track sold separately.
Related Information:
There is also a good range of Linear Slides - MiniVee - Carriages on the Small Parts and Bearings website.
Bearings - Chamfered Edges
Chamfered edge bearings for Linear Guide Systems and pushbikes
Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.
Related Information:
There is also a good range of Bearings - Chamfered Edges on the Small Parts and Bearings website.
Linear Slides - MiniVee - Support Spacer
Use with MiniVee carriages and support washers
Low profile miniature linear slide system ideal for semi-conductor, laboratory, medical and packaging applications. Non actuated MiniVee linear slide consists of one or more 6061-T6 anodised aluminium wheel carriages with Dual Vee integrated wheels. Carriages and track sold separately.
Related Information:
There is also a good range of Linear Slides - MiniVee - Support Spacer on the Small Parts and Bearings website.
Linear Slides - MiniVee - Track - Hardened Steel
Use with MiniVee carriages and support washers
Low profile miniature linear slide system ideal for semi-conductor, laboratory, medical and packaging applications. Non actuated MiniVee linear slide consists of one or more 6061-T6 anodised aluminium wheel carriages with Dual Vee integrated wheels. Double edged track from 165 to 927mm. Carriages and track sold separately.
Related Information:
There is also a good range of Linear Slides - MiniVee - Track - Hardened Steel on the Small Parts and Bearings website.
Linear Slides - MiniVee - Track - Unhardened Steel
Use with MiniVee carriages and support washers
Low profile miniature linear slide system ideal for semi-conductor, laboratory, medical and packaging applications. Non actuated MiniVee linear slide consists of one or more 6061-T6 anodised aluminium wheel carriages with Dual Vee integrated wheels. Double edged track from 165 to 927mm. Carriages and track sold separately.
Related Information:
There is also a good range of Linear Slides - MiniVee - Track - Unhardened Steel on the Small Parts and Bearings website.
Spiral Rings - Internal - Light Duty
Includes series CI / VH / UR - Spring Steel and Stainless Steel.
Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.
There is also a good range of Spiral Rings - Internal - Light Duty on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic
3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic on the Small Parts and Bearings website.
EM3000 Nose Cone C. De Giorgi Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
There is also a good range of EM3000 Nose Cone C. De Giorgi Parts on the Small Parts and Bearings website.
O-Rings - Silicone Rubber
High thermal resistance and cold flexibility. Some dental applications are included in the listings.
Temperature Range: -70oC to +200oC. Good dialectric properties and resistance to ozone and oxygen attack. Retains flexibility at high and low temperatures. Poor strength and tear resistance. Poor resistance to oils, fuels, concentrated acids and alkalis, water and steam.
Related Information:
There is also a good range of O-Rings - Silicone Rubber on the Small Parts and Bearings website.
Bearings - Tapered Roller - Cone
Replacements for existing tapered roller cones (inner part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.
There is also a good range of Bearings - Tapered Roller - Cone on the Small Parts and Bearings website.
Shaftloc-tm Sleeves - Single Ended
Simple effective way to lock components onto shafts.
416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.
Related Information:
There is also a good range of Shaftloc-tm Sleeves - Single Ended on the Small Parts and Bearings website.
Rollers - Durasoft - Shaft Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.
There is also a good range of Rollers - Durasoft - Shaft Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Durasoft - Shaft Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Durasoft - Shaft Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Durasoft - Stud Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.
There is also a good range of Rollers - Durasoft - Stud Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Durasoft - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Durasoft - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Solid - Shaft Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed.
There is also a good range of Rollers - Solid - Shaft Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Solid - Shaft Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Solid - Shaft Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Solid - Stud Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings.
There is also a good range of Rollers - Solid - Stud Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Solid - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Blue colour may turn a shade of green when exposed to UV lighting. Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings.
There is also a good range of Rollers - Solid - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Durasoft - Finned - Stud Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.
There is also a good range of Rollers - Durasoft - Finned - Stud Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Durasoft - Finned - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Durasoft - Finned - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.
Ballscrew - 16mm Nuts - Pillow Block
Includes ball nut. Match all components within the 16mm range only.
Antibacklash. Repeatability 0.01mm, accuracy 0.1mm/300mm when used with our 16mm screws. Hardened ground and polished Cf53 steel to HRC62 +/-2. Balls hardened HRC63 +/- 2.
There is also a good range of Ballscrew - 16mm Nuts - Pillow Block on the Small Parts and Bearings website.
Rollers - Solid - Bonded to Steel Insert - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed.
There is also a good range of Rollers - Solid - Bonded to Steel Insert - Black Neoprene on the Small Parts and Bearings website.
Rollers - Solid - Bonded to Steel Insert - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Solid - Bonded to Steel Insert - Coloured Urethane on the Small Parts and Bearings website.
Main Pages
About Us
Balls
Bearings
Brands
Catalogue
Ceramic Bearings
Clearance Items
Contact Us
Dental Bearings
Frequently Asked Questions
Freight Rates and Shipping Times
Games Clearance
Hobby Clearance
Hobby Information
Mailorder Form
Ordering
Payment and Shipping
Privacy
Product Showcase
Google Search
Shipping Rates and Times
Small Bearings
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online
Bearing Shop Online offers 25472 products in 536 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.
Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.
