Bearing Shop Online - an MBA business

Drylin Bearings And Systems Categories


Drylin Sliding Bearings
Drylin Sliding Bearings


Linear sliding motion. Use with Drylin Aluminium Shafts.

Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: Less than 2 N/mm2. Maximum Speed: 8 m/s (dry) Greater than 10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60oC to +100oC (increased wear when used in excess of 80oC).

Related Information:

There is also a good range of Drylin Sliding Bearings on the Small Parts and Bearings website.


You may also be interested in

Bearings Special Purpose


Bearings - Chamfered Edges
Bearings - Chamfered Edges


Chamfered edge bearings for Linear Guide Systems and pushbikes

Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.

Related Information:

There is also a good range of Bearings - Chamfered Edges on the Small Parts and Bearings website.


Linear Slides


Linear Guide System - Two Piece
Linear Guide System - Two Piece


Using Frelon Gold plain bearing technology. Rail and carriage are made from 6063-T6 aluminium and come as a set.

Rails are ceramic coated to resist corrosion and repel weld spatter and contaminants. Smooth running. Dampens vibration. Guide has slots for T nuts or bolts. Two component system allows for easier installation than traditional rail systems.

There is also a good range of Linear Guide System - Two Piece on the Small Parts and Bearings website.


Bearings Acetal Plastic


Bearings - Acetal - Special Purpose
Bearings - Acetal - Special Purpose


Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems


There is also a good range of Bearings - Acetal - Special Purpose on the Small Parts and Bearings website.


Shafting Aluminium


Shafting - Supported - Pre-Drilled - Aluminium
Shafting - Supported - Pre-Drilled - Aluminium

Also see combined categories:
All Shafting
All Aluminium Shafting

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.

There is also a good range of Shafting - Supported - Pre-Drilled - Aluminium on the Small Parts and Bearings website.


Shafting - Aluminium
Shafting - Aluminium

Also see combined categories:
All Shafting
All Aluminium Shafting

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.

There is also a good range of Shafting - Aluminium on the Small Parts and Bearings website.


Shafting - Pipe - Aluminium
Shafting - Pipe - Aluminium

Also see combined categories:
All Pipe Shaft
All Metal Tube

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.

There is also a good range of Shafting - Pipe - Aluminium on the Small Parts and Bearings website.


Bearings Special Purpose


Bearings - Spherical OD
Bearings - Spherical OD


Bearings with a spherical outside diameter.

Combined listing of spherical OD track rollers and bearings for Linear Guide systems.

Related Information:

There is also a good range of Bearings - Spherical OD on the Small Parts and Bearings website.


Ball Transfers


Ball Transfer Units - Base Mount - Standard - Steel
Ball Transfer Units - Base Mount - Standard - Steel

Also see combined categories:
All Base Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Base Mount - Standard - Steel on the Small Parts and Bearings website.


Ball Transfer Units - Dismantlable - Heavy Duty - Steel
Ball Transfer Units - Dismantlable  - Heavy Duty - Steel

Also see combined categories:
All Push Fit Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Dismantlable - Heavy Duty - Steel on the Small Parts and Bearings website.


Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.

There is also a good range of Ball Transfer Units - Screw Stem - Steel - Precision on the Small Parts and Bearings website.


Housings with Bearing


Housings - Igubal - Sliding
Housings - Igubal - Sliding

Also see combined categories:
All Housings with Integral Bearing

Housing: Aluminium. Insert: Sliding film Iglidur(R) J. Tolerance for the Shaft: h7. Use with Drylin aluminium shafts.

Related Information:

There is also a good range of Housings - Igubal - Sliding on the Small Parts and Bearings website.


Ball Transfers


Ball Transfer Units - Base Mount - Heavy Duty - Steel
Ball Transfer Units - Base Mount  - Heavy Duty - Steel

Also see combined categories:
All Base Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Base Mount - Heavy Duty - Steel on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Standard - Stainless - Deep
Ball Transfer Units - Flange Mount - Standard - Stainless - Deep

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Standard - Stainless - Deep on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Standard - Stainless - Slim
Ball Transfer Units - Flange Mount - Standard - Stainless - Slim

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Standard - Stainless - Slim on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Standard - Steel - Slim
Ball Transfer Units - Flange Mount - Standard - Steel - Slim

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Standard - Steel - Slim on the Small Parts and Bearings website.


Ball Transfer Units - Screw Stem - Brass and Aluminium
Ball Transfer Units - Screw Stem - Brass and Aluminium

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.

There is also a good range of Ball Transfer Units - Screw Stem - Brass and Aluminium on the Small Parts and Bearings website.


Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated
Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated


Single ball bearings units for conveyor systems

Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.

There is also a good range of Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated on the Small Parts and Bearings website.


Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated
Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated

Also see combined categories:
All Push Fit Ball Transfers

Single ball bearings units for conveyor systems

Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.

There is also a good range of Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel
Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel
Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Heavy Duty - Zinc Plated
Ball Transfer Units - Flange Mount - Heavy Duty - Zinc Plated

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Zinc Plated on the Small Parts and Bearings website.


Linear - Mini Rail - Self-Lubricating - Carriage
Linear - Mini Rail - Self-Lubricating - Carriage


Additional carriages for the Mini-Rail system. Match by rail width.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments.

Related Information:

There is also a good range of Linear - Mini Rail - Self-Lubricating - Carriage on the Small Parts and Bearings website.


Linear - Mini Rail - Self-Lubricating - Carriage and Rail
Linear - Mini Rail - Self-Lubricating - Carriage and Rail


Comes with one carriage. Spare carriages sold separately - match by rail width.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments.

Related Information:

There is also a good range of Linear - Mini Rail - Self-Lubricating - Carriage and Rail on the Small Parts and Bearings website.


Linear Track System - Crowned Roller
Linear Track System - Crowned Roller


Rails, rollers and end stops sold separately. Please choose your components from the listing.

Easy to use system is usually mounted on a vertical surface as a low cost linear motion solution. Hardened crown roller allows for self-alignment with good strength and long life. Rails are unistrut typeand are black powder coated. End stops prevent over travel and come with a mounting bolt. End stops are not designed to support loads. Maximum bearing load is 130 kg. Maximum bearing speed is 45 mtrs per minute.

There is also a good range of Linear Track System - Crowned Roller on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Double Row - Open
Bearings - Ball - 316 Stainless Steel - Double Row - Open

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Double Row - Open on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Open on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Small Parts and Bearings website.


Bearings - Acetal - Disk Cleaning Applications
Bearings - Acetal - Disk Cleaning Applications


Special acetal bearings for disk cleaning


There is also a good range of Bearings - Acetal - Disk Cleaning Applications on the Small Parts and Bearings website.


Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Double Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls on the Small Parts and Bearings website.


Bearings - Acetal - Double Row - with Glass Balls
Bearings - Acetal - Double Row - with Glass Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Double Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Double Row - with Glass Balls on the Small Parts and Bearings website.


Bearings - Acetal - MRI Table
Bearings - Acetal - MRI Table


Special acetal bearings for MRI table wheels


There is also a good range of Bearings - Acetal - MRI Table on the Small Parts and Bearings website.


Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls on the Small Parts and Bearings website.


Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls on the Small Parts and Bearings website.


Bearings - Acetal - Single Row - with Glass Balls
Bearings - Acetal - Single Row - with Glass Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Single Row - with Glass Balls on the Small Parts and Bearings website.


Bearings - Acetal - Special Types
Bearings - Acetal - Special Types


Light duty acetal bearings used for drawer runners, light duty tracks, garage doors and more.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

There is also a good range of Bearings - Acetal - Special Types on the Small Parts and Bearings website.


Bearings for Pool Equipment
Bearings for Pool Equipment


Acetal bearings for spa jets and pool vacuum wheels

No lubrication required other than the water they are running in.

Related Information:

There is also a good range of Bearings for Pool Equipment on the Small Parts and Bearings website.


Bearings - Polypropylene - Special Types
Bearings - Polypropylene - Special Types


Polypropylene is for special chemical compatibility usages. Please refer to a compatibility chart.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

There is also a good range of Bearings - Polypropylene - Special Types on the Small Parts and Bearings website.


Bearings - Ball - Angular Contact - 440C Stainless
Bearings - Ball - Angular Contact - 440C Stainless

Also see combined categories:
All Angular Contact Bearings

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Related Information:

There is also a good range of Bearings - Ball - Angular Contact - 440C Stainless on the Small Parts and Bearings website.


Bearings - Ball - Angular Contact - Chrome Steel
Bearings - Ball - Angular Contact - Chrome Steel

Also see combined categories:
All Angular Contact Bearings

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Related Information:

There is also a good range of Bearings - Ball - Angular Contact - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - Angular Contact - Flanged - 440C Stainless
Bearings - Ball - Angular Contact - Flanged - 440C Stainless

Also see combined categories:
All Angular Contact Bearings

Single row angular contact ball bearings with flanges.

Related Information:

There is also a good range of Bearings - Ball - Angular Contact - Flanged - 440C Stainless on the Small Parts and Bearings website.


Bearings - Tapered Roller - Single Row - Inch Sets
Bearings - Tapered Roller - Single Row - Inch Sets


Common automotive sets include cup and cone



Bearings - Ball - Ceramic Hybrid
Bearings - Ball - Ceramic Hybrid

Also see combined categories:
All Radial Ball Bearings

Steel Races with Si3N4 Ceramic Balls

Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC.

Related Information:

There is also a good range of Bearings - Ball - Ceramic Hybrid on the Small Parts and Bearings website.


Bearings - Ceramic Si3N4 - Angular Contact
Bearings - Ceramic Si3N4 - Angular Contact

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic Si3N4 - Angular Contact on the Small Parts and Bearings website.


Bearings - Ceramic Si3N4 - Radial
Bearings - Ceramic Si3N4 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic Si3N4 - Radial on the Small Parts and Bearings website.


Bearings - Ceramic ZrO2 - Radial
Bearings - Ceramic ZrO2 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic ZrO2 - Radial on the Small Parts and Bearings website.


Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row on the Small Parts and Bearings website.


Bearings - Clutch Release - TNK Type
Bearings - Clutch Release - TNK Type

Also see combined categories:
All Clutch Release Bearings



Bearings - Conveyor - Hex Bore - Plastic - Double Row
Bearings - Conveyor - Hex Bore - Plastic - Double Row

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended.

There is also a good range of Bearings - Conveyor - Hex Bore - Plastic - Double Row on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online

Bearing Shop Online offers 25465 products in 536 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online

Bearing Shop Online offers 25465 products in 536 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.