Bearing Shop Online - an MBA business

Linear Slides Cross Roller Tables Steel Categories


Linear Slides


Linear Slides - Cross Roller Tables - Steel
Linear Slides - Cross Roller Tables - Steel

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Cross Roller Tables - Steel.

There is also a good range of Linear Slides - Cross Roller Tables - Steel on the Small Parts and Bearings website.


Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel
Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

There is also a good range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel on the Small Parts and Bearings website.


Linear Slides - Cross Roller Tables - Aluminium
Linear Slides - Cross Roller Tables - Aluminium

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Cross Roller Tables - Aluminium.

There is also a good range of Linear Slides - Cross Roller Tables - Aluminium on the Small Parts and Bearings website.


Linear Slides - Low Profile - Crossed Roller Table - Aluminium
Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Low Profile - Crossed Roller Table - Aluminium.

There is also a good range of Linear Slides - Low Profile - Crossed Roller Table - Aluminium on the Small Parts and Bearings website.


Slides - Linear - Cross Roller Rail
Slides - Linear - Cross Roller Rail

Also see combined categories:
All Linear Slides

Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.

Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds. This category may be available in the new MBA online store at Slides - Linear - Cross Roller Rail.

There is also a good range of Slides - Linear - Cross Roller Rail on the Small Parts and Bearings website.


Linear Slide Assemblies - Cross Roller
Linear Slide Assemblies - Cross Roller

Also see combined categories:
All Linear Slide Assemblies

Higher load capacity than precision ball slide assemblies. High cycling rates. Tolerant of shock and overhanging loads.

Accuracy of 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm. Not as naturally cleaning as ball slides. A good choice for environments protected from dust, and when heavy loads are a consideration. Positive stops prevent over-travel. Rollers improve capacity 8-10 times that of balls. Alternately crossed rollers handle force in any direction. Lightweight aluminium carriage and base. Interchangeable with many types of ball slides. Four tapped carriage holes and two counter bored base holes simplify installation and component mounting. This category may be available in the new MBA online store at Linear Slide Assemblies - Cross Roller.

There is also a good range of Linear Slide Assemblies - Cross Roller on the Small Parts and Bearings website.


Slides - Linear - Recirculating Ball - Standard
Slides - Linear - Recirculating Ball - Standard

Also see combined categories:
All Linear Slides

The BSR precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants. Note BSR1530SL and BSR2040SL can not be mounted from inside of track rail.

There is also a good range of Slides - Linear - Recirculating Ball - Standard on the Small Parts and Bearings website.


Slides - Linear - Non Recirculating Ball - Standard
Slides - Linear - Non Recirculating Ball - Standard

Also see combined categories:
All Linear Slides

The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.

There is also a good range of Slides - Linear - Non Recirculating Ball - Standard on the Small Parts and Bearings website.


Redi-Rail - Roller Guides
Redi-Rail - Roller Guides


Match carriage and rail by rail widh

Easy to use system can be installed into many applications including packaging, material handling, automation and assembly equipment. A complete unit consists of a roller guide and rail (sold separately). The roller guide is made from 6061-T6 aluminium base with 3 rollers. Rollers made from 52100 hardened steel, lubricated and sealed. Rail made from 6061-T6 aluminium with hardened and ground steel raceways for the rollers to run on. This category may be available in the new MBA online store at Redi-Rail - Roller Guides.

Related Information:

There is also a good range of Redi-Rail - Roller Guides on the Small Parts and Bearings website.


Linear Track System - Crowned Roller
Linear Track System - Crowned Roller


Rails, rollers and end stops sold separately. Please choose your components from the listing.

Easy to use system is usually mounted on a vertical surface as a low cost linear motion solution. Hardened crown roller allows for self-alignment with good strength and long life. Rails are unistrut typeand are black powder coated. End stops prevent over travel and come with a mounting bolt. End stops are not designed to support loads. Maximum bearing load is 130 kg. Maximum bearing speed is 45 mtrs per minute. This category may be available in the new MBA online store at Linear Track System - Crowned Roller.

There is also a good range of Linear Track System - Crowned Roller on the Small Parts and Bearings website.


Redi-Rail - Rail
Redi-Rail - Rail


Match carriage and rail by rail widh

Easy to use system can be installed into many applications including packaging, material handling, automation and assembly equipment. A complete unit consists of a roller guide and rail (sold separately). The roller guide is made from 6061-T6 aluminium base with 3 rollers. Rollers made from 52100 hardened steel, lubricated and sealed. Rail made from 6061-T6 aluminium with hardened and ground steel raceways for the rollers to run on. This category may be available in the new MBA online store at Redi-Rail - Rail.

Related Information:

There is also a good range of Redi-Rail - Rail on the Small Parts and Bearings website.


Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel
Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel


Match with carriage by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Rails are subjected to multiple straightening processes during and after grinding of the ball paths to ensure straight and accurate rails. This category may be available in the new MBA online store at Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel.

Related Information:

There is also a good range of Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel on the Small Parts and Bearings website.


Rail Systems - Type 3 - Linear - Precision - Carriage - Carbon Steel - Narrow
Rail Systems - Type 3 - Linear - Precision - Carriage - Carbon Steel - Narrow


Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination.

Related Information:

There is also a good range of Rail Systems - Type 3 - Linear - Precision - Carriage - Carbon Steel - Narrow on the Small Parts and Bearings website.


Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard
Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard


Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination.

Related Information:

There is also a good range of Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard on the Small Parts and Bearings website.


Positioning Stages
Positioning Stages


Used for Gauging and Positioning Light to Medium Loads. Ball slide and crossed roller types available.

Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. Positioning Slides can be stacked for Multi axis applications. Preloaded positioning slides fully assemebled. Black Anodized Finish. This category may be available in the new MBA online store at Positioning Stages.

There is also a good range of Positioning Stages on the Small Parts and Bearings website.


Linear Slide Assemblies - Plain - Low Profile - High Load
Linear Slide Assemblies - Plain - Low Profile - High Load

Also see combined categories:
All Linear Slide Assemblies

High capacity, square gib slides are ideal for precision machine tool applications.

The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.

There is also a good range of Linear Slide Assemblies - Plain - Low Profile - High Load on the Small Parts and Bearings website.


Rollers - Steel
Rollers - Steel

Also see combined categories:
All Rollers

Hardened Steel Rollers as used in Cylindrical and Needle Roller Bearings

Hardened Steel Rollers as used in Cylindrical and Needle Roller Bearings. This category may be available in the new MBA online store at Rollers - Steel.

Related Information:

There is also a good range of Rollers - Steel on the Small Parts and Bearings website.


Slides - Dovetail
Slides - Dovetail

Also see combined categories:
All Linear Slides

Used for work feeders for production milling, positioning fixutres, work holding devices, checking fixtures, shuttle devices, assembly equipment, etc.

Tapered gibs are adjusted with a single screw that moves the gib on the taper. This type remains parallel and wears less as it occurs over the entire surface. Made of continuous cast GS 40,000 PSI pearlitic grey iron. Able to be milled, drilled, tapped, etc. This category may be available in the new MBA online store at Slides - Dovetail.

There is also a good range of Slides - Dovetail on the Small Parts and Bearings website.


Linear - Assemblies - Ball Slide - Precision
Linear - Assemblies - Ball Slide - Precision


These precision ball slides have a typical coefficient of friction of 0.003 and provide straight line accuracy of 0.0005mm per mm of travel.

At load capacity a life of 250 million mm of travel can be expected. The expected life at half load capacity is 2.5 billion mm. Factory preload adjustment prevents sideplay and backlash. Lightweight aluminium carriage and base with high load capacity. Four tapped and threaded carriage holes and counterbored base holes simplify installation and component mounting. Long life, self cleaning ball bearing needs no lubrication. Positional repeatability 0.005mm. Clear anodised finish.

There is also a good range of Linear - Assemblies - Ball Slide - Precision on the Small Parts and Bearings website.


Rollers - Solid - Bonded to Steel Insert - Black Neoprene
Rollers - Solid - Bonded to Steel Insert - Black Neoprene

Also see combined categories:
All Solid Rollers with Insert

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. This category may be available in the new MBA online store at Rollers - Solid - Bonded to Steel Insert - Black Neoprene.

There is also a good range of Rollers - Solid - Bonded to Steel Insert - Black Neoprene on the Small Parts and Bearings website.


Rollers - Solid - Bonded to Steel Insert - Coloured Urethane
Rollers - Solid - Bonded to Steel Insert - Coloured Urethane

Also see combined categories:
All Solid Rollers with Insert

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Solid - Bonded to Steel Insert - Coloured Urethane.

There is also a good range of Rollers - Solid - Bonded to Steel Insert - Coloured Urethane on the Small Parts and Bearings website.


Linear - Mini Rail - Self-Lubricating - Rail
Linear - Mini Rail - Self-Lubricating - Rail


Rail Only. Carriages sold separately - match by rail width.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments. This category may be available in the new MBA online store at Linear - Mini Rail - Self-Lubricating - Rail.

Related Information:

There is also a good range of Linear - Mini Rail - Self-Lubricating - Rail on the Small Parts and Bearings website.


Linear - Mini Rail - Self-Lubricating - Carriage
Linear - Mini Rail - Self-Lubricating - Carriage


Carriages for the Mini-Rail system. Match by rail width. Rail sold separately.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments. This category may be available in the new MBA online store at Linear - Mini Rail - Self-Lubricating - Carriage.

Related Information:

There is also a good range of Linear - Mini Rail - Self-Lubricating - Carriage on the Small Parts and Bearings website.


Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous. This category may be available in the new MBA online store at Bearings - Linear - Ball - Stainless Steel - Closed.

Related Information:

There is also a good range of Bearings - Linear - Ball - Stainless Steel - Closed on the Small Parts and Bearings website.


Linear Guide System - Two Piece
Linear Guide System - Two Piece


Using Frelon Gold plain bearing technology. Rail and carriage are made from 6063-T6 aluminium and come as a set.

Rails are ceramic coated to resist corrosion and repel weld spatter and contaminants. Smooth running. Dampens vibration. Guide has slots for T nuts or bolts. Two component system allows for easier installation than traditional rail systems. This category may be available in the new MBA online store at Linear Guide System - Two Piece.

There is also a good range of Linear Guide System - Two Piece on the Small Parts and Bearings website.


Bearings - Linear - Ball - Thomson Precision Steel - Closed
Bearings - Linear - Ball - Thomson Precision Steel - Closed

Also see combined categories:
All Thomson Linear Ball Bearings

For running on shafts fixed at the ends.

This category may be available in the new MBA online store at Bearings - Linear - Ball - Thomson Precision Steel - Closed.

Related Information:

There is also a good range of Bearings - Linear - Ball - Thomson Precision Steel - Closed on the Small Parts and Bearings website.


Cam Followers - Roller Type - Stainless Steel
Cam Followers - Roller Type - Stainless Steel

Also see combined categories:
All Cam Followers

Stainless steel roller type cam followers.

Stainless Steel similar to 440C. Seals: Synthetic rubber seals. Shields: Stainless Steel shields. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Related Information:

There is also a good range of Cam Followers - Roller Type - Stainless Steel on the Small Parts and Bearings website.


Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms. This category may be available in the new MBA online store at Ball Transfer Units - Screw Stem - Steel - Precision.

There is also a good range of Ball Transfer Units - Screw Stem - Steel - Precision on the Small Parts and Bearings website.


Bearings - Linear - Sliding - Stainless - PTFE - Closed
Bearings - Linear - Sliding - Stainless - PTFE - Closed

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000. This category may be available in the new MBA online store at Bearings - Linear - Sliding - Stainless - PTFE - Closed.

There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Closed on the Small Parts and Bearings website.


Bearings - Linear - Sliding - Stainless - PTFE - Open
Bearings - Linear - Sliding - Stainless - PTFE - Open

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000. This category may be available in the new MBA online store at Bearings - Linear - Sliding - Stainless - PTFE - Open.

There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Open on the Small Parts and Bearings website.


Cam Followers - Roller Type - Standard
Cam Followers - Roller Type - Standard

Also see combined categories:
All Cam Followers

Carbon steel roller type cam followers.

Load 1 applies when outer race is mounted into a housing with standard bearing fit. Load 2 applies when used as a track roller. Stud designed to fit H7 housing. This category may be available in the new MBA online store at Cam Followers - Roller Type - Standard.

Related Information:

There is also a good range of Cam Followers - Roller Type - Standard on the Small Parts and Bearings website.


Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow
Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow


Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination. Thin dense chrome.

Related Information:

There is also a good range of Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow on the Small Parts and Bearings website.


Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard
Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard


Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination. Thin dense chrome.

Related Information:

There is also a good range of Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard on the Small Parts and Bearings website.


Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated
Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated


Match with carriage by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Rails are subjected to multiple straightening processes during and after grinding of the ball paths to ensure straight and accurate rails. This category may be available in the new MBA online store at Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated.

Related Information:

There is also a good range of Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated on the Small Parts and Bearings website.


Dual Vee - Tracks with Mounting Holes - Steel
Dual Vee - Tracks with Mounting Holes - Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel. This category may be available in the new MBA online store at Dual Vee - Tracks with Mounting Holes - Steel.

Related Information:

There is also a good range of Dual Vee - Tracks with Mounting Holes - Steel on the Small Parts and Bearings website.


Shafting - Pre Drilled and Tapped - Stainless Steel
Shafting - Pre Drilled and Tapped - Stainless Steel

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings

This category may be available in the new MBA online store at Shafting - Pre Drilled and Tapped - Stainless Steel.

There is also a good range of Shafting - Pre Drilled and Tapped - Stainless Steel on the Small Parts and Bearings website.


Dual Vee - Tracks with Mounting Holes - Stainless Steel
Dual Vee - Tracks with Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel. This category may be available in the new MBA online store at Dual Vee - Tracks with Mounting Holes - Stainless Steel.

Related Information:

There is also a good range of Dual Vee - Tracks with Mounting Holes - Stainless Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Washers Only - Chrome Steel
Bearings - Thrust - Ball - Washers Only - Chrome Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Carbon Steel Washers are hardened to RC59.61. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Washers Only - Chrome Steel.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Washers Only - Chrome Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Washers Only - Stainless Steel
Bearings - Thrust - Ball - Washers Only - Stainless Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Washers Only - Stainless Steel.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Washers Only - Stainless Steel on the Small Parts and Bearings website.


Supports - Pedestal Two Bolt
Supports - Pedestal Two Bolt

Also see combined categories:
All Supports

For linear shafting.

Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel. This category may be available in the new MBA online store at Supports - Pedestal Two Bolt.

Related Information:

There is also a good range of Supports - Pedestal Two Bolt on the Small Parts and Bearings website.


Bearings - Self Clinching - Self Aligning - Sintered Bronze
Bearings - Self Clinching - Self Aligning - Sintered Bronze

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearing in a special self-clinching steel housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

There is also a good range of Bearings - Self Clinching - Self Aligning - Sintered Bronze on the Small Parts and Bearings website.


Bushings - Stroke Rotary - Miniature
Bushings - Stroke Rotary - Miniature

Also see combined categories:
All Stroke Rotary Bushings

2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.

Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100oC (Constant), +120oC (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.

Related Information:

There is also a good range of Bushings - Stroke Rotary - Miniature on the Small Parts and Bearings website.


Bearings - Self Clinching - Self Aligning - Delrin -tm-
Bearings - Self Clinching - Self Aligning - Delrin -tm-

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo acetal bearings in a special steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

There is also a good range of Bearings - Self Clinching - Self Aligning - Delrin -tm- on the Small Parts and Bearings website.


Bearings - Spherical OD
Bearings - Spherical OD


Bearings with a spherical outside diameter.

Combined listing of spherical OD track rollers and bearings for Linear Guide systems. This category may be available in the new MBA online store at Bearings - Spherical OD.

Related Information:

There is also a good range of Bearings - Spherical OD on the Small Parts and Bearings website.


Spiral Rings - External - Heavy Duty - Carbon Steel
Spiral Rings - External - Heavy Duty - Carbon Steel

Also see combined categories:
All External Spiral Rings
All External Carbon Steel Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2. This category may be available in the new MBA online store at Spiral Rings - External - Heavy Duty - Carbon Steel.

There is also a good range of Spiral Rings - External - Heavy Duty - Carbon Steel on the Small Parts and Bearings website.


Spiral Rings - External - Heavy Duty - Stainless Steel
Spiral Rings - External - Heavy Duty - Stainless Steel

Also see combined categories:
All External Spiral Rings
All External Stainless Steel Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2. This category may be available in the new MBA online store at Spiral Rings - External - Heavy Duty - Stainless Steel.

There is also a good range of Spiral Rings - External - Heavy Duty - Stainless Steel on the Small Parts and Bearings website.


Spiral Rings - Internal - Heavy Duty - Carbon Steel
Spiral Rings - Internal - Heavy Duty - Carbon Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Carbon Steel Spiral Rings

Includes AHI / WHM / AS3215 / RRN / MIL-R-27426B2 - Spring Steel

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2. This category may be available in the new MBA online store at Spiral Rings - Internal - Heavy Duty - Carbon Steel.

There is also a good range of Spiral Rings - Internal - Heavy Duty - Carbon Steel on the Small Parts and Bearings website.


Spiral Rings - Internal - Heavy Duty - Stainless Steel
Spiral Rings - Internal - Heavy Duty - Stainless Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Stainless Steel Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2. This category may be available in the new MBA online store at Spiral Rings - Internal - Heavy Duty - Stainless Steel.

There is also a good range of Spiral Rings - Internal - Heavy Duty - Stainless Steel on the Small Parts and Bearings website.


Ballscrew - Thomson Saginaw
Ballscrew - Thomson Saginaw

Also see combined categories:
All Ball Screws

Offer 90% efficiency converting rotary to linear motion with low coefficient of friction. Match all components within the Thomson Saginaw range only.

When replacing screws, hydraulics or pneumatics, they allow the use of smaller, less expensive drive motors and reduce the need for auxiliary equipment. Offer dependable accuracy and repeatability, Made off high quality alloy steel, hardened to Rockwell 56-60C. This category may be available in the new MBA online store at Ballscrew - Thomson Saginaw.

There is also a good range of Ballscrew - Thomson Saginaw on the Small Parts and Bearings website.


Roller Followers - Needle Roller Type - Full Complement - Sealed
Roller Followers - Needle Roller Type - Full Complement - Sealed


Non separable roller followers

Inner ring has oil hole and oil groove. Prepacked with grease. Full complement typr with inner ring. This category may be available in the new MBA online store at Roller Followers - Needle Roller Type - Full Complement - Sealed.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings List Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online

Bearing Shop Online offers 30432 products in 532 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online

Bearing Shop Online offers 30432 products in 532 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.