Rod Ends Stamped Categories
Rod Ends - Steel - Stamped - Female
Economy stamped style combines high strength with low cost. Also known as Heim Joints
Made from low carbon steel and plated for corrosion resistance. Ball is case hardened.
There is also a good range of Rod Ends - Steel - Stamped - Female on the Small Parts and Bearings website.
You may also be interested in
Rod Ends Plastic
Rod Ends - Plastic - Female
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Plastic - Female on the Small Parts and Bearings website.
Rod Ends - Plastic - Male
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Plastic - Male on the Small Parts and Bearings website.
Rod Ends PTFE Lined
Rod Ends - Steel - PTFE Lined - Tight Fit - Female
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit - Female on the Small Parts and Bearings website.
Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit - Male on the Small Parts and Bearings website.
Rod Ends Stainless Steel
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female
Also known as Heim Joints
There is also a good range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male
Tight fit (Minimal ball clearance). Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female
Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female on the Small Parts and Bearings website.
Rod Ends - Stainless Steel - Bronze Lined - Male
Also known as Heim Joints
Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.
There is also a good range of Rod Ends - Stainless Steel - Bronze Lined - Male on the Small Parts and Bearings website.
Rod Ends Standard
Rod Ends - Steel - Bronze Lined - Female
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - Bronze Lined - Female on the Small Parts and Bearings website.
Rod Ends - Steel - Bronze Lined - Male
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - Bronze Lined - Male on the Small Parts and Bearings website.
Rod Ends Studded
Rod Ends - Steel - Studded - Nylon Seat - Female
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.
There is also a good range of Rod Ends - Steel - Studded - Nylon Seat - Female on the Small Parts and Bearings website.
Balls Metallic
Balls - Steel - Bored
Bored steel balls as used in steel rod ends.
Hardness: 58-64 Rc. Material: SUJ-2.
Related Information:
There is also a good range of Balls - Steel - Bored on the Small Parts and Bearings website.
Balls Plastic
Balls - Plastic - Bored
Bored acetal balls as used in plastic rod ends.
Maintenance Free - Self Lubricating. Corrosion Resistant Iglidur W300 material. Suitable for rotating, oscillating and linear movement. Lightweight.
Related Information:
There is also a good range of Balls - Plastic - Bored on the Small Parts and Bearings website.
Shaftloc-tm Sleeves - Single Ended
Simple effective way to lock components onto shafts.
416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.
Related Information:
There is also a good range of Shaftloc-tm Sleeves - Single Ended on the Small Parts and Bearings website.
Rod - Round - Sintered Bronze
Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.
Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.
Related Information:
There is also a good range of Rod - Round - Sintered Bronze on the Small Parts and Bearings website.
E-Clips - Bowed
For end play take up.
Thickness tolerance +/- 0.025.
There is also a good range of E-Clips - Bowed on the Small Parts and Bearings website.
Bearings - Linear - Ball - Thomson Precision Steel - Closed
For running on shafts fixed at the ends.
Related Information:
There is also a good range of Bearings - Linear - Ball - Thomson Precision Steel - Closed on the Small Parts and Bearings website.
Bearings - Needle Roller - Shell Type - Closed End
Light Weight. Compact Design.
Related Information:
There is also a good range of Bearings - Needle Roller - Shell Type - Closed End on the Small Parts and Bearings website.
Bearings - Needle Roller - Shell Type - Open Ends
Light Weight. Compact Design.
Related Information:
There is also a good range of Bearings - Needle Roller - Shell Type - Open Ends on the Small Parts and Bearings website.
Linear Track System - Crowned Roller
Rails, rollers and end stops sold separately. Please choose your components from the listing.
Easy to use system is usually mounted on a vertical surface as a low cost linear motion solution. Hardened crown roller allows for self-alignment with good strength and long life. Rails are unistrut typeand are black powder coated. End stops prevent over travel and come with a mounting bolt. End stops are not designed to support loads. Maximum bearing load is 130 kg. Maximum bearing speed is 45 mtrs per minute.
There is also a good range of Linear Track System - Crowned Roller on the Small Parts and Bearings website.
Keys - Machine - Stainless Steel
Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884
Related Information:
There is also a good range of Keys - Machine - Stainless Steel on the Small Parts and Bearings website.
Shafting - Ground - Precision - Chrome Plated
Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Case hardened and recommended for use with precision bearings. Ends are not plated.
Case hardened to 60-65 Rockwell C. Chrome plated for corrosion resistance.
There is also a good range of Shafting - Ground - Precision - Chrome Plated on the Small Parts and Bearings website.
Bearings - Linear - Ball - Stainless Steel - Closed
Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.
Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.
Related Information:
There is also a good range of Bearings - Linear - Ball - Stainless Steel - Closed on the Small Parts and Bearings website.
Linear Slide Assemblies - Ball - Pre-Loaded - Compliant
Pre-loaded ball slides provide an acceptable level of accuracy of 0.001mm per mm for most linear motion applications. Considerably lower cost than crossed roller slides.
Uses a conventional hardened steel rod raceway and balls. Incorporates an elastomer spine and shock absorbing backup gib. Provides even and continuous preload, whilst minimising the effects of impact and shock. Tolerant to contamination and can operate of millions of cycles without lubrication. 8-32 UNC mounting holes.
There is also a good range of Linear Slide Assemblies - Ball - Pre-Loaded - Compliant on the Small Parts and Bearings website.
Shafting - Aluminium - Ceramic Coated
Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.
Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.
Related Information:
There is also a good range of Shafting - Aluminium - Ceramic Coated on the Small Parts and Bearings website.
Shafting - Aluminium - Ceramic Coated - Tapped
Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.
Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.
Related Information:
There is also a good range of Shafting - Aluminium - Ceramic Coated - Tapped on the Small Parts and Bearings website.
Spiral Rings - Internal - Light Duty - Carbon Steel
Includes series CI / VH / UR - Spring Steel
Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.
There is also a good range of Spiral Rings - Internal - Light Duty - Carbon Steel on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Double Row - Open
Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Double Row - Open on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Open
Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Open on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Small Parts and Bearings website.
Pana Air SU03 - TU03 Green-Black NSK Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
There is also a good range of Pana Air SU03 - TU03 Green-Black NSK Parts on the Small Parts and Bearings website.
Mach - Mach-LITE P045SU03 - P046TU03 Green-Black NSK Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
There is also a good range of Mach - Mach-LITE P045SU03 - P046TU03 Green-Black NSK Parts on the Small Parts and Bearings website.
Bearings - Ball - High Speed Cage
This product group includes bearings with cages for high speed applications, including phenolic, nylon and polyamide.
Bearings in this group have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. See individual datasheets, available on request. Items with high speed cages usually have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.
Related Information:
There is also a good range of Bearings - Ball - High Speed Cage on the Small Parts and Bearings website.
Shafting - Carbon Steel - Keyed
Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.
Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.
There is also a good range of Shafting - Carbon Steel - Keyed on the Small Parts and Bearings website.
Rollers - Durasoft - Shaft Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.
There is also a good range of Rollers - Durasoft - Shaft Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Durasoft - Shaft Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Durasoft - Shaft Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Durasoft - Shaft Mount - With Ball Bearing
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Durasoft - Shaft Mount - With Ball Bearing on the Small Parts and Bearings website.
Rollers - Solid - Shaft Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed.
There is also a good range of Rollers - Solid - Shaft Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Solid - Shaft Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Solid - Shaft Mount - Coloured Urethane on the Small Parts and Bearings website.
Shafting - Ground - Precision - High Carbon Steel
Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - High Carbon Steel on the Small Parts and Bearings website.
Bearings - One Way - Roller
Roller Clutch Bearings rotate in one direction only.
Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm.
Related Information:
There is also a good range of Bearings - One Way - Roller on the Small Parts and Bearings website.
Wheels - Conveyor - Skate
Replacement acetal wheels with glass balls for product moving gravity feed skate conveyors. Plastic skate wheels are ideal for washdown or outdoor applications.
General Duty. Plain Centre.
Related Information:
There is also a good range of Wheels - Conveyor - Skate on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 416 Grade Hardened
Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 416 Grade Hardened on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 420 Grade Hardened
Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 420 Grade Hardened on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 440C Grade Hardened
Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 440C Grade Hardened on the Small Parts and Bearings website.
Bearings - Precision Scale
Bearings for scales.
Note! Minimum quantities apply to production of these items.
There is also a good range of Bearings - Precision Scale on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Catalogue
Ceramic Bearings List
Contact Us
Dental Bearings
Downloadable PDF Catalogue Balls
Downloadable PDF Catalogue Ceramic Bearings
Downloadable PDF Catalogue Corrosion Resistant Bearings
Downloadable PDF Catalogue Disc Springs
Downloadable PDF Catalogue Economy Bearings
Downloadable PDF Catalogue High Speed Bearings
Downloadable PDF Catalogue Metallic Bushes
Downloadable PDF Catalogue Plastic Bearings
Downloadable PDF Catalogue Sintered Bronze Bushes
Downloadable PDF Catalogue Snap Rings
Downloadable PDF Catalogue Solid Bronze Bushes
Downloadable PDF Catalogue Standard Ball Bearing Range
Downloadable PDF Catalogue Super Precision Bearings
Downloadable PDF Catalogue Thrust Bearings
Downloadable PDF Cross Reference ADR and SKF
Downloadable PDF Cross Reference Barden Bearings
Downloadable PDF Cross Reference Flocast
Downloadable PDF Cross Reference McMaster Carr
Downloadable PDF Cross Reference Miniature Precison Bearings
Downloadable PDF Cross Reference NSK and NTN
Downloadable PDF Cross Reference Reid Supply
Downloadable PDF Cross Reference SDP-SI Designatronics
Downloadable PDF Cross Reference Sintered Bronze
Freight Rates and Shipping Times
Frequently Asked Questions
Google Search
Hobby Clearance
Hobby Information
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Satellite Reaction Wheels
Shipping Rates and Times
Small Bearings
Technical
Terms
5 Axis Machine Tool Bearings
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online
Bearing Shop Online offers 28836 products in 493 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.
