Shafting Aluminium Categories
Shafting - Aluminium
Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.
Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.
There is also a good range of Shafting - Aluminium on the Small Parts and Bearings website.
Shafting - Aluminium - Ceramic Coated
Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.
Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.
Related Information:
There is also a good range of Shafting - Aluminium - Ceramic Coated on the Small Parts and Bearings website.
Shafting - Aluminium - Ceramic Coated - Tapped
Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.
Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.
Related Information:
There is also a good range of Shafting - Aluminium - Ceramic Coated - Tapped on the Small Parts and Bearings website.
You may also be interested in
Shafting Precision Ground
Rail Supports - With Shaft - One Piece
One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.
Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.
Related Information:
There is also a good range of Rail Supports - With Shaft - One Piece on the Small Parts and Bearings website.
Rail Supports - Without Shaft
For mounting of linear shafting.
Shafting sold separately. Support is made from aluminium.
Related Information:
There is also a good range of Rail Supports - Without Shaft on the Small Parts and Bearings website.
Rail Supports - With Shaft
Includes linear shafting.
Includes shaft to h6 tolerances. Support is made from aluminium.
Related Information:
There is also a good range of Rail Supports - With Shaft on the Small Parts and Bearings website.
Rollers - Feed - With Aluminium Sleeve
Tolerance of Roller Outside Diameter (D) is +/-0.075 mm
Urethane 60 Durometer ground outside diameter. Aluminium sleeve. Feed rollers do not have a rotating bore. They are designed to turn with the shaft.
Related Information:
There is also a good range of Rollers - Feed - With Aluminium Sleeve on the Small Parts and Bearings website.
Bushes - Aluminium Bronze - Flanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
There is also a good range of Bushes - Aluminium Bronze - Flanged on the Small Parts and Bearings website.
Bushes - Aluminium Bronze - Graphite Plug - Flanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
There is also a good range of Bushes - Aluminium Bronze - Graphite Plug - Flanged on the Small Parts and Bearings website.
Bushes - Aluminium Bronze - Graphite Plug - Unflanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
There is also a good range of Bushes - Aluminium Bronze - Graphite Plug - Unflanged on the Small Parts and Bearings website.
Bushes - Aluminium Bronze - Unflanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
There is also a good range of Bushes - Aluminium Bronze - Unflanged on the Small Parts and Bearings website.
Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium
Use with Utilitrak PW Crowned Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.
Related Information:
There is also a good range of Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium on the Small Parts and Bearings website.
Linear Rail System - Aluminium - Carriages
Match with rail by rail width dimension. Lightweight construction and easy installation.
Linear guide system with high load carrying capacity, rigity and torque resistance. Rollers are lubricated for life. Base plate anodised aluminium with factory fitted rollers. Elastic elements around the threaded bolts adjust and fix the rollers in the baseplate avoiding risk of mounting error. Supplied with a light preload to cover a wide variety of applications. Load data is for centrally acting loads. For eccentrically acting loads the data should be corrected according to the laws of mechanics. In the case of dynamic loads in the z-direction Fz should be corrected by a factor of 0.6.
Related Information:
There is also a good range of Linear Rail System - Aluminium - Carriages on the Small Parts and Bearings website.
Linear Rail System - Aluminium - Rail
Match with carriage by rail width dimension. Lightweight construction and easy installation.
Linear guide system with high load carrying capacity, rigity and torque resistance. Rollers are lubricated for life. Drawn and anodised aluminium body with hardened steel angle raceways fitted on each side.
Related Information:
There is also a good range of Linear Rail System - Aluminium - Rail on the Small Parts and Bearings website.
Housings - Igubal - Sliding
Housing: Aluminium. Insert: Sliding film Iglidur(R) J. Tolerance for the Shaft: h7. Use with Drylin aluminium shafts.
Related Information:
There is also a good range of Housings - Igubal - Sliding on the Small Parts and Bearings website.
Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium
Use with Utilitrak PW Dual Vee Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.
Related Information:
There is also a good range of Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium on the Small Parts and Bearings website.
Linear Slides - Cross Roller Tables - Aluminium
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.
There is also a good range of Linear Slides - Cross Roller Tables - Aluminium on the Small Parts and Bearings website.
Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium
Starting at 8mm bore size, aluminium silver series housings with removable chrome steel bearing
There is also a good range of Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium on the Small Parts and Bearings website.
Ball Transfer Units - Screw Stem - Brass and Aluminium
Single ball bearings units for conveyor systems
Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.
There is also a good range of Ball Transfer Units - Screw Stem - Brass and Aluminium on the Small Parts and Bearings website.
Linear Slides - Low Profile - Crossed Roller Table - Aluminium
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.
There is also a good range of Linear Slides - Low Profile - Crossed Roller Table - Aluminium on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Miniature
Spyraflo aluminium pillow block housings mounted with 440C stainless miniature bearings
No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.
Related Information:
There is also a good range of Housings - Bearing - Pillow Block - Miniature on the Small Parts and Bearings website.
Drylin Sliding Bearings
Linear sliding motion. Use with Drylin Aluminium Shafts.
Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: Less than 2 N/mm2. Maximum Speed: 8 m/s (dry) Greater than 10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60oC to +100oC (increased wear when used in excess of 80oC).
Related Information:
There is also a good range of Drylin Sliding Bearings on the Small Parts and Bearings website.
Shafting - Ground - Precision - Titanium - Ti-Gr5 - TC4
Titanium shafting available in oversized and undersized tolerances
Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent. Shaft with undersized tolerances is suitable for use with precision ground bearings. Shaft with oversized tolerances is suitable for pulleys or gears requiring interference fits, or for machining to your required tolerances.
Related Information:
There is also a good range of Shafting - Ground - Precision - Titanium - Ti-Gr5 - TC4 on the Small Parts and Bearings website.
Housings - Pillow Block - Washdown
Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
Spyraflo electroless nickel plated aluminium housing with stainless steel coated self aligning acetal bearings.
See links at bottom of web page for more information. +/- 5% Static Alignment. Electroless nickel plated aluminium housing. Corrosion Resistant. Light weight.
Related Information:
There is also a good range of Housings - Pillow Block - Washdown on the Small Parts and Bearings website.
Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1
CP2 Commercially Pure Titanium Grade 2. Tensile Strength 35.2 kgf/mm2. Yield Strength 28.2 kgf/mm2. Elongation 20 Percent.
Commercially pure for general industrial corrosion applications. UNS R50400. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.3, O 0.25, Ti Balance. Shaft with undersized tolerances is suitable for use with precision ground bearings. Shaft with oversized tolerances is suitable for pulleys or gears requiring interference fits, or for machining to your required tolerances.
Related Information:
There is also a good range of Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1 on the Small Parts and Bearings website.
Shafting - Linear - Square
There is also a good range of Shafting - Linear - Square on the Small Parts and Bearings website.
Shafting - Carbon Steel - Keyed
Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.
Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.
There is also a good range of Shafting - Carbon Steel - Keyed on the Small Parts and Bearings website.
Shafting - Ground - Precision - Chrome Plated
Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Case hardened and recommended for use with precision bearings. Ends are not plated.
Case hardened to 60-65 Rockwell C. Chrome plated for corrosion resistance.
There is also a good range of Shafting - Ground - Precision - Chrome Plated on the Small Parts and Bearings website.
Shafting - Ground - Precision - High Carbon Steel
Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - High Carbon Steel on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 303 Grade
Precision ground shafting.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 303 Grade on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 416 Grade Hardened
Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 416 Grade Hardened on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 420 Grade Hardened
Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 420 Grade Hardened on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 440C Grade Hardened
Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 440C Grade Hardened on the Small Parts and Bearings website.
Shafting - Pre Drilled and Tapped - High Carbon Steel
For use with rail supports and open linear bearings
Straightness: 0.1 mm / mtr.
There is also a good range of Shafting - Pre Drilled and Tapped - High Carbon Steel on the Small Parts and Bearings website.
Shafting - Pre Drilled and Tapped - Stainless Steel Steel
For use with rail supports and open linear bearings
There is also a good range of Shafting - Pre Drilled and Tapped - Stainless Steel Steel on the Small Parts and Bearings website.
Housings - Flanged - Self Aligning - Needle Roller
Spyraflo robust light weight aluminium housing with self aligning needle roller bearings
See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.
Related Information:
There is also a good range of Housings - Flanged - Self Aligning - Needle Roller on the Small Parts and Bearings website.
Housings - Flanged - Self Aligning - Bronze - Heavy Duty
Spyraflo robust light weight aluminium housing with self aligning bronze bearings.
See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.
Related Information:
There is also a good range of Housings - Flanged - Self Aligning - Bronze - Heavy Duty on the Small Parts and Bearings website.
Housings - Pillow Block - Self Aligning - Needle Roller
Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
Spyraflo robust light weight aluminium housing with self aligning needle roller bearings.
See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.
Related Information:
There is also a good range of Housings - Pillow Block - Self Aligning - Needle Roller on the Small Parts and Bearings website.
Housings - Pillow Block - Self Aligning - Sintered Bronze
Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
Spyraflo robust light weight aluminium housing with porous sintered bronze
See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.
Related Information:
There is also a good range of Housings - Pillow Block - Self Aligning - Sintered Bronze on the Small Parts and Bearings website.
Shafts - Pinion
There is also a good range of Shafts - Pinion on the Small Parts and Bearings website.
Shafts - Flexible - Panel Mount - Cased
See PDF file at bottom of internet page for Performance Data.
Related Information:
There is also a good range of Shafts - Flexible - Panel Mount - Cased on the Small Parts and Bearings website.
Shafts - Flexible - Panel Mount - Open
See PDF file at bottom of internet page for Performance Data.
Related Information:
There is also a good range of Shafts - Flexible - Panel Mount - Open on the Small Parts and Bearings website.
Assortment Kits - Various
Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins
There is also a good range of Assortment Kits - Various on the Small Parts and Bearings website.
Linear Guide System - Two Piece
Using Frelon Gold plain bearing technology. Rail and carriage are made from 6063-T6 aluminium and come as a set.
Rails are ceramic coated to resist corrosion and repel weld spatter and contaminants. Smooth running. Dampens vibration. Guide has slots for T nuts or bolts. Two component system allows for easier installation than traditional rail systems.
There is also a good range of Linear Guide System - Two Piece on the Small Parts and Bearings website.
Linear Slides - Utilitrak - CR - Channels
Use with Utilitrak CR Carriages. Composite heat treated stainless steel mounted to an extruded aluminium base. Match by size.
Related Information:
There is also a good range of Linear Slides - Utilitrak - CR - Channels on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Standard - Closed
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.
There is also a good range of Housings - Bearing - Pillow Block - Frelon - Standard - Closed on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Standard - Open
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.
There is also a good range of Housings - Bearing - Pillow Block - Frelon - Standard - Open on the Small Parts and Bearings website.
Housings - Linear - Square
Used to maintain radial integrity and eliminate the need for parallel shafting.
Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.
There is also a good range of Housings - Linear - Square on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Precision - Closed
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.
There is also a good range of Housings - Bearing - Pillow Block - Frelon - Precision - Closed on the Small Parts and Bearings website.
Housings - Bearing - Pillow Block - Frelon - Precision - Open
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.
There is also a good range of Housings - Bearing - Pillow Block - Frelon - Precision - Open on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Catalogue
Ceramic Bearings List
Clearance Items List
Contact Us
Dental Bearings
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Small Bearings
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online
Bearing Shop Online offers 25862 products in 532 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.
Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.
