Square Shaft Categories
Shafting - Linear - Square
There is also a good range of Shafting - Linear - Square on the Small Parts and Bearings website.
You may also be interested in
Linear Bearings with Housing
Housings - Linear - Square
Used to maintain radial integrity and eliminate the need for parallel shafting.
Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.
There is also a good range of Housings - Linear - Square on the Small Parts and Bearings website.
Bearings - Square Groove Profile OD
Special bearings. Not readily available.
There is also a good range of Bearings - Square Groove Profile OD on the Small Parts and Bearings website.
Housings - Linear - Square - Clamps
There is also a good range of Housings - Linear - Square - Clamps on the Small Parts and Bearings website.
Housings - Bearing - Flanged - Square - Cast Iron
Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.
Related Information:
There is also a good range of Housings - Bearing - Flanged - Square - Cast Iron on the Small Parts and Bearings website.
Housings - Bearing - Flanged - Square - W300
With integral self aligning plain bearing.
Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 oC to +180 oC.
There is also a good range of Housings - Bearing - Flanged - Square - W300 on the Small Parts and Bearings website.
Leadscrew Nuts - Metric - Square - Metallic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
Related Information:
There is also a good range of Leadscrew Nuts - Metric - Square - Metallic on the Small Parts and Bearings website.
Linear Slide Assemblies - Plain - Low Profile - High Load
High capacity, square gib slides are ideal for precision machine tool applications.
The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.
There is also a good range of Linear Slide Assemblies - Plain - Low Profile - High Load on the Small Parts and Bearings website.
Shafting - Aluminium
Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.
Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.
There is also a good range of Shafting - Aluminium on the Small Parts and Bearings website.
Shafting - Aluminium - Ceramic Coated
Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.
Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.
Related Information:
There is also a good range of Shafting - Aluminium - Ceramic Coated on the Small Parts and Bearings website.
Shafting - Aluminium - Ceramic Coated - Tapped
Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.
Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.
Related Information:
There is also a good range of Shafting - Aluminium - Ceramic Coated - Tapped on the Small Parts and Bearings website.
Shafting - Carbon Steel - Keyed
Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.
Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.
There is also a good range of Shafting - Carbon Steel - Keyed on the Small Parts and Bearings website.
Shafting - Ground - Precision - Chrome Plated
Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Case hardened and recommended for use with precision bearings. Ends are not plated.
Case hardened to 60-65 Rockwell C. Chrome plated for corrosion resistance.
There is also a good range of Shafting - Ground - Precision - Chrome Plated on the Small Parts and Bearings website.
Shafting - Ground - Precision - High Carbon Steel
Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - High Carbon Steel on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 303 Grade
Precision ground shafting.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 303 Grade on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 416 Grade Hardened
Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 416 Grade Hardened on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 420 Grade Hardened
Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 420 Grade Hardened on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 440C Grade Hardened
Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 440C Grade Hardened on the Small Parts and Bearings website.
Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1
CP2 Commercially Pure Titanium Grade 2. Tensile Strength 35.2 kgf/mm2. Yield Strength 28.2 kgf/mm2. Elongation 20 Percent.
Commercially pure for general industrial corrosion applications. UNS R50400. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.3, O 0.25, Ti Balance. Shaft with undersized tolerances is suitable for use with precision ground bearings. Shaft with oversized tolerances is suitable for pulleys or gears requiring interference fits, or for machining to your required tolerances.
Related Information:
There is also a good range of Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1 on the Small Parts and Bearings website.
Shafting - Ground - Precision - Titanium - Ti-Gr5 - TC4
Titanium shafting available in oversized and undersized tolerances
Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent. Shaft with undersized tolerances is suitable for use with precision ground bearings. Shaft with oversized tolerances is suitable for pulleys or gears requiring interference fits, or for machining to your required tolerances.
Related Information:
There is also a good range of Shafting - Ground - Precision - Titanium - Ti-Gr5 - TC4 on the Small Parts and Bearings website.
Shafting - Pre Drilled and Tapped - High Carbon Steel
For use with rail supports and open linear bearings
Straightness: 0.1 mm / mtr.
There is also a good range of Shafting - Pre Drilled and Tapped - High Carbon Steel on the Small Parts and Bearings website.
Shafting - Pre Drilled and Tapped - Stainless Steel Steel
For use with rail supports and open linear bearings
There is also a good range of Shafting - Pre Drilled and Tapped - Stainless Steel Steel on the Small Parts and Bearings website.
Shafts - Pinion
There is also a good range of Shafts - Pinion on the Small Parts and Bearings website.
Shafts - Flexible - Panel Mount - Cased
See PDF file at bottom of internet page for Performance Data.
Related Information:
There is also a good range of Shafts - Flexible - Panel Mount - Cased on the Small Parts and Bearings website.
Shafts - Flexible - Panel Mount - Open
See PDF file at bottom of internet page for Performance Data.
Related Information:
There is also a good range of Shafts - Flexible - Panel Mount - Open on the Small Parts and Bearings website.
Rail Supports - Without Shaft
For mounting of linear shafting.
Shafting sold separately. Support is made from aluminium.
Related Information:
There is also a good range of Rail Supports - Without Shaft on the Small Parts and Bearings website.
Rail Supports - With Shaft
Includes linear shafting.
Includes shaft to h6 tolerances. Support is made from aluminium.
Related Information:
There is also a good range of Rail Supports - With Shaft on the Small Parts and Bearings website.
Rail Supports - With Shaft - One Piece
One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.
Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.
Related Information:
There is also a good range of Rail Supports - With Shaft - One Piece on the Small Parts and Bearings website.
Assortment Kits - Various
Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins
There is also a good range of Assortment Kits - Various on the Small Parts and Bearings website.
Collars - Shaft - Clamp Type - One Piece - Stainless Steel
Related Information:
There is also a good range of Collars - Shaft - Clamp Type - One Piece - Stainless Steel on the Small Parts and Bearings website.
Collars - Shaft - Clamp Type - One Piece - Steel
Related Information:
There is also a good range of Collars - Shaft - Clamp Type - One Piece - Steel on the Small Parts and Bearings website.
Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel
Includes 303 and 304 Grade Stainless
Related Information:
There is also a good range of Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel on the Small Parts and Bearings website.
Collars - Shaft - Fairloc
Related Information:
There is also a good range of Collars - Shaft - Fairloc on the Small Parts and Bearings website.
Collars - Shaft - Gripfast - 304 Stainless Steel
Self Locking - Quick Release.
304 Stainless Body, Retention Ring, Balls and Springs.
Related Information:
There is also a good range of Collars - Shaft - Gripfast - 304 Stainless Steel on the Small Parts and Bearings website.
Collars - Shaft - Gripfast - ABS Plastic
Self Locking - Quick Release.
265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.
Related Information:
There is also a good range of Collars - Shaft - Gripfast - ABS Plastic on the Small Parts and Bearings website.
Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel
Related Information:
There is also a good range of Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel on the Small Parts and Bearings website.
Collars - Shaft - Hex Bore - One Piece - Steel
Related Information:
There is also a good range of Collars - Shaft - Hex Bore - One Piece - Steel on the Small Parts and Bearings website.
Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel
Related Information:
There is also a good range of Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel on the Small Parts and Bearings website.
Collars - Shaft - Hex Bore - Two Piece - Steel
Related Information:
There is also a good range of Collars - Shaft - Hex Bore - Two Piece - Steel on the Small Parts and Bearings website.
Collars - Shaft - Hinged - Stainless Steel
Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel
Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.
Related Information:
There is also a good range of Collars - Shaft - Hinged - Stainless Steel on the Small Parts and Bearings website.
Collars - Shaft - Hinged - Steel
Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)
Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.
Related Information:
There is also a good range of Collars - Shaft - Hinged - Steel on the Small Parts and Bearings website.
Collars - Shaft - Standard - Stainless Steel
Includes miniature precision types. 303 and 316 Types.
Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.
Related Information:
There is also a good range of Collars - Shaft - Standard - Stainless Steel on the Small Parts and Bearings website.
Collars - Shaft - Standard - Steel
Includes miniature precision types. Carbon steel.
Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.
Related Information:
There is also a good range of Collars - Shaft - Standard - Steel on the Small Parts and Bearings website.
Rollers - Durasoft - Shaft Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.
There is also a good range of Rollers - Durasoft - Shaft Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Durasoft - Shaft Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Durasoft - Shaft Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Solid - Shaft Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed.
There is also a good range of Rollers - Solid - Shaft Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Solid - Shaft Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Solid - Shaft Mount - Coloured Urethane on the Small Parts and Bearings website.
Linear Ball Splines - Shaft
Use with either flanged or unflanged Linear Ball Spline Bearings.
Related Information:
There is also a good range of Linear Ball Splines - Shaft on the Small Parts and Bearings website.
Bearings - Linear - Ball - Closed
Standard closed type to run on standard 60HRC shafts with h6 tolerances
Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.
Related Information:
There is also a good range of Bearings - Linear - Ball - Closed on the Small Parts and Bearings website.
Bearings - Press-Fit - Acetal - SDP
Press fit installation. Do not press bearing against insert. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Carbon steel outer. Self aligning to +/- 5o. Use any shaft material with 0.4 um or finer finish.
Related Information:
There is also a good range of Bearings - Press-Fit - Acetal - SDP on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Catalogue
Ceramic Bearings List
Clearance Items List
Contact Us
Dental Bearings
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Small Bearings
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414) - Trading as Bearing Shop Online
Bearing Shop Online offers 25852 products in 532 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.
Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.
