Bearing Shop Online - an MBA business

W201pp Fafnir


Cross Referenced Part Numbers



6201B-2RS FAFNIR part number W201PP

Matches our part number
6201B-2RS
(Click item to order)

Description: ID (d): 12.000. OD (D): 32.000. Width (B): 15.900.

Group: Bearings - Ball - Chrome Steel

Stock: Backorder  


Category Matches

Fishing Reel Parts


0.040 inch Line Game Reel Duro Parts
0.040 inch Line Game Reel Duro Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


There is also a good range of 0.040 inch Line Game Reel Duro Parts on the Small Parts and Bearings website.

0.040 inch Line Game Reel Shakespeare Parts
0.040 inch Line Game Reel Shakespeare Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


There is also a good range of 0.040 inch Line Game Reel Shakespeare Parts on the Small Parts and Bearings website.

Shafting Aluminium


Shafting - Supported - Pre-Drilled - Aluminium
Shafting - Supported - Pre-Drilled - Aluminium

Also see combined categories:
All Shafting
All Aluminium Shafting

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.


There is also a good range of Shafting - Supported - Pre-Drilled - Aluminium on the Small Parts and Bearings website.

Shafting Precision Ground


Rail Supports - Without Shaft
Rail Supports - Without Shaft

Also see combined categories:
All Shaft Supports

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Related Information:
Shafting Predrilled for Supports
Linear Bearing in Housing
Linear Bearings

There is also a good range of Rail Supports - Without Shaft on the Small Parts and Bearings website.

Rail Supports - With Shaft
Rail Supports - With Shaft

Also see combined categories:
All Shaft Supports

Includes linear shafting.

Includes shaft to h6 tolerances. Support is made from aluminium.

Related Information:
Linear Bearing in Housing
Linear Bearings

There is also a good range of Rail Supports - With Shaft on the Small Parts and Bearings website.

Rail Supports - With Shaft - One Piece
Rail Supports - With Shaft - One Piece

Also see combined categories:
All Shaft Supports

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Related Information:
Linear Bearing in Housing
Linear Bearings
Frelon Linear Bearings

There is also a good range of Rail Supports - With Shaft - One Piece on the Small Parts and Bearings website.

You may also like

Balls Ceramic


Balls - Ceramic - Sapphire - Synthetic
Balls - Ceramic - Sapphire - Synthetic

Also see combined categories:
All Ceramic Balls
All Non Metallic Balls

Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.

Tolerances available on request. Specific Gravity: 3.98. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Transparent (refractive index 1.76).

Related Information:
AFBMA Ball Grades
Other Types of Balls

There is also a good range of Balls - Ceramic - Sapphire - Synthetic on the Small Parts and Bearings website.

Bearings for Dental Equipment


Bearings - Dental Applications
Bearings - Dental Applications

See Dental Handpiece Bearings and Orings for applications by model.

This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.


There is also a good range of Bearings - Dental Applications on the Small Parts and Bearings website.

Belts Timing XL Pitch 5.08mm


Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide
Belts - Timing -  5.080mm Pitch - XL -  7.9mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Related Information:
For simple ready selected sets of timing belts and pulleys please see the SPB Website

There is also a good range of Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide on the Small Parts and Bearings website.

Linear Slides


Linear Slides - MiniVee - Support Spacer
Linear Slides - MiniVee - Support Spacer

Use with MiniVee carriages and support washers

Low profile miniature linear slide system ideal for semi-conductor, laboratory, medical and packaging applications. Non actuated MiniVee linear slide consists of one or more 6061-T6 anodised aluminium wheel carriages with Dual Vee integrated wheels. Carriages and track sold separately.

Related Information:
MiniVee Carriages
Hardened Steel Track
Unhardened Steel Track

There is also a good range of Linear Slides - MiniVee - Support Spacer on the Small Parts and Bearings website.

Bearings Acetal


Bearings - Acetal - Disk Cleaning Applications
Bearings - Acetal - Disk Cleaning Applications

Also see combined categories:
All Plastic Single Row Bearings

Special acetal bearings for disk cleaning


There is also a good range of Bearings - Acetal - Disk Cleaning Applications on the Small Parts and Bearings website.

Circlips


Circlips - External - Standard - Berryllium Copper
Circlips - External - Standard - Berryllium Copper

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Related Information:
Circlip Pliers
Stainless Steel External Circlips

There is also a good range of Circlips - External - Standard - Berryllium Copper on the Small Parts and Bearings website.

E-Clips - Basic - Berrylium Copper
E-Clips - Basic - Berrylium Copper

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Berrylium Copper.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip.

Related Information:
Applicators For Production Work

There is also a good range of E-Clips - Basic - Berrylium Copper on the Small Parts and Bearings website.

Shafting Aluminium


Shafting - Aluminium - Ceramic Coated - Tapped
Shafting - Aluminium - Ceramic Coated - Tapped

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:
Frelon Gold Linear Bearings

There is also a good range of Shafting - Aluminium - Ceramic Coated - Tapped on the Small Parts and Bearings website.

Shafting Precision Ground


Shafting - Pre Drilled and Tapped - High Carbon Steel
Shafting - Pre Drilled and Tapped - High Carbon Steel

Also see combined categories:
All Shafting
All Steel Shafting

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.


There is also a good range of Shafting - Pre Drilled and Tapped - High Carbon Steel on the Small Parts and Bearings website.

Shafting - Pre Drilled and Tapped - Stainless Steel Steel
Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings


There is also a good range of Shafting - Pre Drilled and Tapped - Stainless Steel Steel on the Small Parts and Bearings website.

Leadscrews


Leadscrews - Imperial - Acme - Stainless Steel 18.8
Leadscrews - Imperial - Acme - Stainless Steel 18.8

Also see combined categories:
All Imperial Leadscrews

Acme Leadscrew Thread - Use with Acme Supernuts

Related Information:
Imperial Acme Nuts
Imperial Acme Nut Flanges

There is also a good range of Leadscrews - Imperial - Acme - Stainless Steel 18.8 on the Small Parts and Bearings website.

Balls Metallic


Balls - Phosphor Bronze
Balls - Phosphor Bronze

Also see combined categories:
All Metallic Balls

Specific Gravity 8.4

Related Information:
AFBMA Ball Grades
Other Types of Balls

There is also a good range of Balls - Phosphor Bronze on the Small Parts and Bearings website.

O-Rings for Dental Applications


O-Rings - Dental
O-Rings - Dental

Special Orings for Dental Applications.

Special Orings for Dental Applications.

Related Information:
Dental Handpiece Parts - Miscellaneous
Dental Bearings
Tools for Dental Handpiece Repair

There is also a good range of O-Rings - Dental on the Small Parts and Bearings website.

Linear Bearings


Bearings - Linear - Sliding - Ceramic Coated
Bearings - Linear - Sliding - Ceramic Coated

Also see combined categories:
All Sliding Linear Bearings

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000.


There is also a good range of Bearings - Linear - Sliding - Ceramic Coated on the Small Parts and Bearings website.

Collars


Collars - Shaft - With Integral Shim
Collars - Shaft - With Integral Shim

Also see combined categories:
All Round Bore Shaft Collars

Bore tolerance (+0.003/+0.013). Imperial Collars have undersized tolerances. Metric Collars have oversized tolerances.

Related Information:
Shafting

There is also a good range of Collars - Shaft - With Integral Shim on the Small Parts and Bearings website.

Bushes Plastic


Bushes - Plastic - Rulon J - Flanged
Bushes - Plastic - Rulon J - Flanged

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Max Load: 5.2 MPa (750 psi). Gold colour. Max surface speed: 2m/s. Max PV: 0.26 (Mpa x m/s)

Non Metallic Bushes. Excellent insulator. Nor suitable for steam or wet conditions. Not FDA compliant. Suitable for dry conditions or vacuum. 288 oC (550 Deg F) Maximum Working Temperature. Patented all polymeric PTFE compound which operates well against soft mating surfaces. Lowest co-efficient of friction in the Rulon(R) product range.


There is also a good range of Bushes - Plastic - Rulon J - Flanged on the Small Parts and Bearings website.

Bushes - Plastic - Rulon J - Unflanged
Bushes - Plastic - Rulon J - Unflanged

Also see combined categories:
All Plastic Bushes
All Unflanged Plastic Bushes

Max Load: 5.2 MPa (750 psi). Gold colour. Max surface speed: 2m/s. Max PV: 0.26 (Mpa x m/s)

Non Metallic Bushes. Excellent insulator. Nor suitable for steam or wet conditions. Not FDA compliant. Suitable for dry conditions or vacuum. 288 oC (550 Deg F) Maximum Working Temperature. Patented all polymeric PTFE compound which operates well against soft mating surfaces. Lowest co-efficient of friction in the Rulon(R) product range.


There is also a good range of Bushes - Plastic - Rulon J - Unflanged on the Small Parts and Bearings website.

Balls Plastic


Balls - Plastic - Polypropylene
Balls - Plastic - Polypropylene

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

Excellent for liquid level float applications.

Tolerance and spherecity: up to and including 25.4mm diameter = +/-0.0508mm, over 25.4mm diameter +/-0.0762mm. Very resistant to most acids and alkalies. Excellent for liquid level float applications. Unpolished. Specific Gravity: 0.91.

Related Information:
AFBMA Ball Grades
Other Types of Balls

There is also a good range of Balls - Plastic - Polypropylene on the Small Parts and Bearings website.

Bearings Pivot


Bearings - Pivot - With Inner Ring
Bearings - Pivot - With Inner Ring

Also see combined categories:
All Pivot Bearings

Note! Minimum quantities apply to production of these items.


There is also a good range of Bearings - Pivot - With Inner Ring on the Small Parts and Bearings website.

Bearings - Pivot - Without Inner Ring
Bearings - Pivot - Without Inner Ring

Also see combined categories:
All Pivot Bearings

Note! Minimum quantities apply to production of these items.


There is also a good range of Bearings - Pivot - Without Inner Ring on the Small Parts and Bearings website.

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Bearing Shop Online offers 25334 products in 538 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Bearing Shop Online offers 25334 products in 538 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.