C95400 - Materials - Technical

C95400 Aluminium Bronze

BSO Products made from this material
Bushes

This material is used in a variety of applications. Typical uses for this alloy are: Bushings, High Strength Clamps, Gears, Valves, Bearings, Pawl, Valve Bodies, Landing Gear Parts, Worm Gears, Machine Parts, Pressure Blocks for the Steel Industry, Bearing Segments for the Steel Industry, Valve Seats, Valve Guides, Pickling Hooks, Spur Gears, Heavily Loaded Worm Gears, Pump Parts.

CHEMICAL COMPOSITION:

(%max., unless shown as range or min.)
NOTE: Information courtesy of Copper.org

	Cu	Al	Fe	Mn	Ni⁽¹⁾
Min./Max.	83.0 min	10.0-11.5	3.0-5.0	.50	1.5
Nominal	83.2	10.8	4.0	-	-

(1) Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.5% min.

MECHANICAL PROPERTIES:

(measured at room temperature, 68 F (20 C)
NOTE: Information courtesy of Copper.org

Temper	Section Size	Cold Work	Typ/ Min	Temp	Tensile Strength	Yield Strength (0.5% ext. under load)	Yield Strength (0.2% offset)	Yield Strength (0.05% offset)	El	Rockwell Hardness				Vickens Hard.	Brinell Hard.		Shear Strength	Fatigue Strength*	Izod Impact Strength
	in.	%		F	ksi	ksi	ksi	ksi	%	B	C	F	30T	500	500	3000	ksi	ksi	ft-lb
	mm.			C	MPa	MPa	MPa	MPa									MPa	MPa	J
As Sand Cast
M01	0.0	0	TYP	68	85	35	-	-	18	-	-	-	-	-	-	170	47	28	16.0
	0.0			20	586	241	-	-	18	-	-	-	-	-	-	170	324	193	22.0
As Centrifugal Cast
TQ50	0.0	0	SMIN	68	90	45	-	-	6	-	-	-	-	-	-	190	-	-	0.0
	0.0			20	620	310	-	-	6	-	-	-	-	-	-	190	-	-	0.0
M02	0.0	0	SMIN	68	75	30	-	-	12	-	-	-	-	-	-	150	-	-	0.0
	0.0			20	515	205	-	-	12	-	-	-	-	-	-	150	-	-	0.0
As Continuous Cast
TQ50	0.0	0	SMIN	68	95	45	-	-	10	-	-	-	-	-	-	-	-	-	0.0
	0.0			20	655	310	-	-	10	-	-	-	-	-	-	-	-	-	0.0
M07	0.0	0	SMIN	68	85	32	-	-	12	-	-	-	-	-	-	-	-	-	0.0
	0.0			20	586	221	-	-	12	-	-	-	-	-	-	-	-	-	0.0
As Permanent Mold Cast
M05	0.0	0	SMIN	68	100	40	-	-	10	-	-	-	-	-	-	-	-	-	0.0
	0.0			20	690	275	-	-	10	-	-	-	-	-	-	-	-	-	0.0
As Sand Cast
TQ50	0.0	0	TYP	68	105	54	-	-	8	-	-	-	-	-	-	195	50	35	11.0
	0.0			20	724	372	-	-	8	-	-	-	-	-	-	195	345	241	15.0
M01	0.0	0	SMIN	68	75	30	-	-	12	-	-	-	-	-	-	150	-	-	0.0
	0.0			20	517	207	-	-	12	-	-	-	-	-	-	150	-	-	0.0
M01	0.0	0	SMIN	68	75	30	-	-	12	-	-	-	-	-	-	150	-	-	0.0
	0.0			20	515	205	-	-	12	-	-	-	-	-	-	150	-	-	0.0
M01	0.0	0	SMIN	68	75	30	-	-	-	-	-	-	-	-	-	-	-	-	0.0
	0.0			20	517	207	-	-	-	-	-	-	-	-	-	-	-	-	0.0
As Permanent Mold Cast
M05	0.0	0	TYP	68	105	46	-	-	11	-	-	-	-	-	-	-	-	-	0.0
	0.0			20	725	320	-	-	11	-	-	-	-	-	-	-	-	-	0.0
As Sand Cast
TQ50	0.0	0	MIN	68	90	45	-	-	6	-	-	-	-	-	-	190	-	-	0.0
	0.0			20	620	310	-	-	6	-	-	-	-	-	-	190	-	-	0.0
TQ50	0.0	0	SMIN	68	90	45	-	-	6	-	-	-	-	-	-	190	-	-	0.0
	0.0			20	621	310	-	-	6	-	-	-	-	-	-	190	-	-	0.0

*Fatigue Strength: 100 x 10 ⁶cycles,
unless indicated as [N]X 10⁶.

APPLICABLE SPECIFICATIONS:

NOTE: Information courtesy of Copper.org

Product	Specification
Centrifugal	ASME SB271 ASTM B271 SAE J461, J462
Continuous	ASTM B505 SAE J461, J462
Ingot	ASTM B30
Permanent	ASTM B806
Precision	MILITARY MIL-C-11866
Sand	ASME SB148 ASTM B66, B148, B763 SAE J461, J462

You can find items made from C95400 aluminium bronze in the Bearing Shop Online Online Catalogue pages.

The Small Parts and Bearings has a much larger range of engineering supplies.

Hobby and Engineering Supplies lists a smaller range of products and only the most popular items in each range. They also list many additional hobby specific categories.

For the best range of miniature and small bearings please try the Miniature Bearings Australia website. Miniature Bearings Australia also list a large variety of miniature engineering products.

Other pages related to Technical - Materials

Click Page Banner Below

Top

Other Technical Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top