Peek - Materials - Technical

Polyether ether ketone (PEEK®) is a colourless organic polymer thermoplastic used in engineering applications.

PEEK® is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. The Young’s modulus is 3.6 GPa and its tensile strength 90 to 100 MPa.[4] PEEK® has a glass transition temperature at around 143 C (289 F) and melts around 343 C (662 F). The thermal conductivity increases nearly linearly versus temperature between room temperature and solidus temperature.[5] It is highly resistant to thermal degradation as well as attack by both organic and aqueous environments. It is attacked by halogens and strong Bronsted and Lewis acids as well as some halogenated compounds and aliphatic hydrocarbons at high temperatures. It dissolves completely in concentrated sulfuric acid at room temperature.

Because of its robustness, PEEK® is used to fabricate items used in demanding applications, including bearings, piston parts, pumps, HPLC columns, compressor plate valves, and cable insulation. It is one of the few plastics compatible with ultra-high vacuum applications. PEEK® is considered an advanced biomaterial used in medical implants. It is extensively used in the aerospace, automotive, teletronic,[clarification needed] and chemical process industries.[6] PEEK®’s mechanical properties at elevated temperatures have led to it being used in at least two varieties of Reprap extruder as thermal insulation. This means the rest of the extruder structure can be made of the same material as the object being fabricated without self-destruction. A disadvantage is the high price, which limits its application to high value items.

PEEK® GRADES

PEEK® (Unfilled)

This general purpose grade is unreinforced and offers the highest elongation and toughness of all PEEK® grades. Unfilled PEEK® is available in sheet and rod forms in natural (a very light brown or tan) color (see photo above) and is also available in black . Black PEEK® is ideal for instrument components where aesthetics are important, as well as for seal components where ductility and inertness are important. All unfilled PEEK® grades comply with FDA regulation 21 CFR 177.2415 for repeated food contact.

PEEK® (30% Glass Filled)

The addition of glass fibers significantly reduces the expansion rate and increases the flexural modulus of PEEK®. This grade is ideal for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300F (150C). Glass-filled PEEK® is light brown or tan in color.

PEEK® (30% Carbon Filled)

The addition of carbon fibers enhances the compressive strength and stiffness of PEEK®, and dramatically lowers its expansion rate. It offers designers optimum wear resistance and load carrying capability in a PEEK®-based product. This grade provides 3 times higher thermal conductivity than unreinforced PEEK® -- dissipating heat from the bearing surface faster. Carbon-filled PEEK® is black in color.

PEEK® (Bearing Grade, Ketron HPV)

This grade of PEEK®, containing carbon fiber reinforced with graphite and PTFE lubricants, offers the lowest coefficient of friction and the best machinability for all PEEK® grades. Bearing grade PEEK® has an excellent combination of low friction, low wear, high limiting PV, low mating part wear, and easy machining. Bearing grade PEEK® is black or dark grey in color.

TYPICAL PROPERTIES of EXTRUDED PEEK®
(compression molded and injection molded versions also available) updated 19May2008
ASTM or UL test Property Unfilled 30% Glass Fibers 30% Carbon Fibers Bearing Grade
PHYSICAL
D792 Density (lb/in³)
(g/cm³)
0.047
1.31
0.056
1.54
0.051
1.41
0.052
1.44
D570 Water Absorption, 24 hrs (%) 0.10 0.10 0.06 0.05
MECHANICAL
D638 Tensile Strength (psi) 16,000 15,000 19,000 11,000
D638 Tensile Modulus (psi) 500,000 900,000 1,100,000 850,000
D638 Tensile Elongation at Break (%) 20 3 5 2
D790 Flexural Strength (psi) 25,000 28,000 25,750 27,500
D790 Flexural Modulus (psi) 600,000 1,000,000 1,250,000 1,100,000
D695 Compressive Strength (psi) 20,000 26,000 29,000 26,700
D695 Compressive Modulus (psi) 500,000 1,000,000 - 1,000,000
D785 Hardness, Rockwell M100 (R126) M103 M102 M85
D256 IZOD Impact Notched (ft-lb/in) 1.0 1.4 1.0 0.7
THERMAL
D696 Coefficient of Linear Thermal Expansion
(x 10-5 in./in./°F)
2.6 1.2 1.0 1.7
D648 Heat Deflection Temp (°F / °C)
at 264 psi

320 / 160

600 / 315

550 / 288

383 / 195
D3418 Melting Temp (°F / °C) 644 / 340 644 / 340 644 / 340 -
- Max Operating Temp (°F / °C) 480 / 249 480 / 249 500 / 260 482 / 250
C177 Thermal Conductivity
(BTU-in/ft²-hr-°F)
(x 10-4 cal/cm-sec-°C)

1.75
6.03

2.98
10.3

6.4
22.0

1.7
5.9
UL94 Flammability Rating V-0 V-0 V-0 V-0
ELECTRICAL
D149 Dielectric Strength (V/mil) short time, 1/8" thick 480 500 32 -
D150 Dielectric Constant at 1 MHz 3.30 3.70 - -
D150 Dissipation Factor at 1 MHz 0.003 - - -
D257 Volume Resistivity (ohm-cm) at 50% RH 4.9 x 1016 5 x 1016 105 103

NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets.
All values at 73°F (23°C) unless otherwise noted.
PEEK® is a trademark of Victrex USA, Inc.


The Small Parts and Bearings has a much larger range of engineering supplies.

Hobby and Engineering Supplies lists a smaller range of products and only the most popular items in each range. They also list many additional hobby specific categories.

For the best range of miniature and small bearings please try the Miniature Bearings Australia website. Miniature Bearings Australia also list a large variety of miniature engineering products.



Other pages related to Technical - Materials

Click Page Banner Below

Top

Other Technical Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Bearing Shop Online offers 25256 products in 536 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Bearing Shop Online is part of MBA Group offering a select range from the MBA Group catalogue.

Bearing Shop Online products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Bearing Shop Online 1997. All rights reserved.